Серверы последовательных интерфейсов

Серверы последовательных устройств являются простым и экономически выгодным способом быстрого подключения оборудования с интерфейсом RS-232/RS-422/RS-485 к компьютеру посредством сети Ethernet. При этом не требуется написание программ для компьютера, что позволяет сэкономить затраты на разработку ПО. Серверы последовательных интерфейсов является идеальным решением для удаленного управления и мониторинга состояния ваших устройств с последовательным интерфейсом RS-232/RS-422/RS-485 по сети Ethernet.

• Universal quad-band GSM/GPRS 850/900/1800/1900 MHz
• Dual SIM for telecom redundancy
• Support SDHC SD Card for Data Buffering
• Connect Ethernet and Serial Devices over VPN
• Various operation modes: COM port redirector, RVCOM, TCP, UDP, SMS tunnel, and pair connection
• Any baud rate setting for easy configuration
• Supports Universal quad-band GSM/GPRS 850/900/1800/1900 MHz
• Built-in 15 KV ESD protection for all serial signals
• 1.5 KV isolation protection
• 2 digital inputs
• Multiple configuration methods: Windows utility, Telnet, and Web console
• Supports 32-bit/64-bit Windows 2000/XP/Vista/7, Windows Server 2003/2008, Windows CE 5.0, and Linux

EKI-1321 and EKI-1322 cellular gateways can transparently bring RS-232/422/485 or Ethernet devices to a cellular network. They allow nearly any device with serial or Ethernet ports to connect and share a cellular network with easy and simple configuration. EKI-1321 and EKI-1322 GPRS IP Gateway's are compact, and can be DIN-rail or wall mounted and with both front panel and side panel LED displays for easy identification. They come with dual DC power input from 12 to 48 VDC and have 2 KV EFT/Surge protection to prevent damage from various type of power resources. The serial ports are also protected by 15 KV ESD line protection to keep your system safe from unexpected electrical discharges. Both models support dual SIM slots to support GPRS signal redundancy to switch to an available channel automatically while the existing one is disconnected, and SD card slot for data buffering to prevent loss of serial data while the communication is interrupted.

• Universal quad-band GSM/GPRS 850/900/1800/1900 MHz
• Dual SIM for telecom redundancy
• Support SDHC SD Card for Data Buffering
• Connect Ethernet and Serial Devices over VPN
• Various operation modes: COM port redirector, RVCOM, TCP, UDP, SMS tunnel, and pair connection
• Any baud rate setting for easy configuration
• Built-in 15 KV ESD protection for all serial signals
• Multiple configuration methods: Windows utility, Telnet, and Web console
• Supports 32-bit/64-bit Windows 2000/XP/Vista/7, Windows Server 2003/2008, Windows CE 5.0, and Linux

EKI-1321 and EKI-1322 cellular gateways can transparently bring RS-232/422/485 or Ethernet devices to a cellular network. They allow nearly any device with serial or Ethernet ports to connect and share a cellular network with easy and simple configuration. EKI-1321 and EKI-1322 GPRS IP Gateway's are compact, and can be DIN-rail or wall mounted and with both front panel and side panel LED displays for easy identification. They come with dual DC power input from 12 to 48 VDC and have 2 KV EFT/Surge protection to prevent damage from various type of power resources. The serial ports are also protected by 15 KV ESD line protection to keep your system safe from unexpected electrical discharges. Both models support dual SIM slots to support GPRS signal redundancy to switch to an available channel automatically while the existing one is disconnected, and SD card slot for data buffering to prevent loss of serial data while the communication is interrupted.

• Link any serial device to an IEEE 802.11b/g/n network
• Support 802.11n MIMO 2T2R
• WLAN transmision rate up to 300 Mbps
• Supports secure access with WEP, WPA/WPA2-Personal, WPA/WPA2-Enterprise
• Provides COM port redirection, TCP, UDP, and pair connection modes
• Supports up to 921.6 kbps, and any baud rate setting
• Provides Web-based configuration and Windows utility
• Allows a max. of 5 hosts to access one serial port
• Supports 32-bit/64-bit Windows 2000/XP/Vista/7, Windows Server 2003/2008, Windows CE 5.0, and Linux
• Allows a max. of 4 hosts to be accessed as TCP client mode

EKI-1361 and EKI-1362 are wireless serial device servers that bring RS-232/422/485 to wireless LAN or LAN. They allow nearly any device with serial ports to connect and share an WLAN network. EKI-1361 and EKI-1362 provide a quick, simple and cost-effective way to bring the advantages of remote management and data accessibility to thousands of devices that cannot connect to a network.
With EKI-1361 and EKI-1362, your existing serial devices can be used with the most popular operating systems on the market. There is no need to write special drivers for specific operating systems. Moreover, you can make serial devices communicate with other devices peer-to-peer, without any intermediate host PCs and software programming. That saves a lot of cost and effort. In addition, you can actively request data or issue commands from the RS-232/422/485 side or wireless LAN side. This data can be sent bilaterally. Thus, the EKI-1361 and EKI-1362 are especially suitable for remote monitoring environments such as security systems, factory automaton, SCADA, transportation and more.

• Link any serial device to an IEEE 802.11b/g/n network
• Support 802.11n MIMO 2T2R
• Support 802.11n MIMO 2T2R
• WLAN transmision rate up to 300 Mbps
• Supports secure access with WEP, WPA/WPA2-Personal, WPA/WPA2-Enterprise
• Provides COM port redirection, TCP, UDP, and pair connection modes
• Supports up to 921.6 kbps, and any baud rate setting
• Provides Web-based configuration and Windows utility
• Allows a max. of 5 hosts to access one serial port
• Supports 32-bit/64-bit Windows 2000/XP/Vista/7, Windows Server 2003/2008, Windows CE 5.0, and Linux
• Allows a max. of 4 hosts to be accessed as TCP client mode

EKI-1361 and EKI-1362 are wireless serial device servers that bring RS-232/422/485 to wireless LAN or LAN. They allow nearly any device with serial ports to connect and share an WLAN network. EKI-1361 and EKI-1362 provide a quick, simple and cost-effective way to bring the advantages of remote management and data accessibility to thousands of devices that cannot connect to a network.
With EKI-1361 and EKI-1362, your existing serial devices can be used with the most popular operating systems on the market. There is no need to write special drivers for specific operating systems. Moreover, you can make serial devices communicate with other devices peer-to-peer, without any intermediate host PCs and software programming. That saves a lot of cost and effort. In addition, you can actively request data or issue commands from the RS-232/422/485 side or wireless LAN side. This data can be sent bilaterally. Thus, the EKI-1361 and EKI-1362 are especially suitable for remote monitoring environments such as security systems, factory automaton, SCADA, transportation and more.

• Два сетевых порта 10/100Base-T с поддержкой резервирования
• Режимы работы: переадресация COM порта (виртуальный COM порт), TCP и UDP передача данных
• Скорость передачи данных до 921 Кбит/с
• Обеспечение доступа 5-ти управляющих компьютеров максимум к одному последовательному порту
• Усовершенствованная защита от неавторизованного доступа
• Обеспечение доступа 16-ти управляющих компьютеров максимум к TCP клиенту, режим ответа на команды
• Программа загрузки и самодиагностики: простая загрузка новых версий встроенного ПО и самотестировани
• Простая в использовании утилита переадресации портов и настройки для ОС Windows® NT/2000/XP
• Легкость установки на DIN рельс или в панель
• Автоматический контроль передачи данных по интерфейсу RS-485

EKI-1521 и EKI-1522 оснащены двумя независимыми Ethernet портами с разными MAC адресами, что обеспечивает их надежную работу в IP сетях. Эти модели являются последовательными шлюзами передачи данных, которые подключают устройства с интерфейсом RS-232/422/485 такие, как ПЛК, измерители, датчики и считыватели штрих кодов, к сетевой инфраструктуре. С их помощью можно подключить практически любое устройство, оснащенное последовательными портами, к Ethernet сети для одновременного доступа к нему с различных узлов. EKI-1521 и EKI-1522 поддерживают несколько режимов работы: переадресация COM порта (виртуальный COM порт), TCP сервер, IP клиент и передача данных по протоколу UDP. В режиме переадресации COM-порта стандартные последовательные операционные вызовы прозрачно перенаправляются шлюзу EKI-1521 или EKI-1522, что обеспечивает совместимость с унаследованными последовательными устройствами и существующим программным обеспечением. В режимах TCP сервер, TCP клиент и передача данных по протоколу UDP эти модели гарантируют совместимость с сетевым ПО, которое использует стандартные сетевые протоколы. Более того, с помощью EKI-1521 и EKI-1522 пользователь может организовать систему так, что последовательные устройства будут передавать данные друг другу в режиме точка-точка без необходимости использования каких-либо промежуточных управляющих компьютеров и без дополнительного программирования.

• Provides 2 x 10/100 Mbps Ethernet ports for LAN redundancy
• Provides COM port redirection (Virtual COM), TCP and UDP operation modes
• Supports up to 921.6 kbps, and any baud rate setting
• Allows a max. of 5 hosts to access one serial port
• Allows a max. of 16 hosts to be accessed as TCP client mode
• Built-in 15 KV ESD protection for all serial signals
• Provides multiple configuration methods including Windows utility, Telnet console, and Web Browser
• Supports 32-bit/64-bit Windows 2000/XP/Vista/7/8/8.1, Windows Server 2003/2008/2012, Windows CE 5.0, and Linux
• Automatic RS-485 data flow control
• Supports surge protection for D.C. power ports with line to line 2 KV, and line to earth 4 KV; for signal ports with 4 KV.
• -40 ~ 70°C (-40 ~ 158°F) wide operating temperature

EKI-1521, EKI-1522 and EKI-1524 feature two independent Ethernet ports and MAC addresses to provide a redundant network mechanism to guarantee Ethernet network reliability. EKI-1521, EKI-1522 and EKI-1524 are serial device servers that connect RS-232/422/485 serial devices, such as PLC, meters, sensors, and barcode reader to an IP-based Ethernet LAN. They allow nearly any device with serial ports to connect and share an Ethernet network. EKI-1521, EKI-1522 and EKI-1524 provide various operations: COM port redirection (Virtual COMport), TCP Server, TCP Client and UDP mode. With COM port redirection mode, standard serial operation calls are transparently redirected to the EKI-1521, EKI-1522 and EKI-1524, guaranteeing compatibility with legacy serial devices and enabling backward compatibility with existing software. With TCP server, TCP client, and UDP modes, EKI-1521, EKI-1522 and EKI-1524 ensure the compatibility of network software that uses a standard network API. Moreover, you can make serial devices communicate with other devices peer-to-peer, without any intermediate host PCs and software programming.

• Provides 2 x 10/100 Mbps Ethernet ports for LAN redundancy
• Provides COM port redirection (Virtual COM), TCP and UDP operation modes
• Supports up to 921.6 kbps, and any baud rate setting
• Allows a max. of 5 hosts to access one serial port
• Allows a max. of 16 hosts to be accessed as TCP client mode
• Built-in 15 KV ESD protection for all serial signals
• Provides multiple configuration methods including Windows utility, Telnet console, and Web Browser
• Supports 32-bit/64-bit Windows 2000/XP/Vista/7/8/8.1, Windows Server 2003/2008/2012, Windows CE 5.0, and Linux
• Automatic RS-485 data flow control
• Supports surge protection for D.C. power ports with line to line 2 KV, and line to earth 4 KV; for signal ports with 4 KV
• Support isolation and wide operating temperature

EKI-1521, EKI-1522 and EKI-1524 feature two independent Ethernet ports and MAC addresses to provide a redundant network mechanism to guarantee Ethernet network reliability. EKI-1521, EKI-1522 and EKI-1524 are serial device servers that connect RS-232/422/485 serial devices, such as PLC, meters, sensors, and barcode reader to an IP-based Ethernet LAN. They allow nearly any device with serial ports to connect and share an Ethernet network. EKI-1521, EKI-1522 and EKI-1524 provide various operations: COM port redirection (Virtual COMport), TCP Server, TCP Client and UDP mode. With COM port redirection mode, standard serial operation calls are transparently redirected to the EKI-1521, EKI-1522 and EKI-1524, guaranteeing compatibility with legacy serial devices and enabling backward compatibility with existing software. With TCP server, TCP client, and UDP modes, EKI-1521, EKI-1522 and EKI-1524 ensure the compatibility of network software that uses a standard network API. Moreover, you can make serial devices communicate with other devices peer-to-peer, without any intermediate host PCs and software programming.

• Два сетевых порта 10/100Base-T с поддержкой резервирования
• Режимы работы: переадресация COM порта (виртуальный COM порт), TCP и UDP передача данных
• Скорость передачи данных до 921 Кбит/с
• Обеспечение доступа 5-ти управляющих компьютеров максимум к одному последовательному порту
• Усовершенствованная защита от неавторизованного доступа
• Обеспечение доступа 16-ти управляющих компьютеров максимум к TCP клиенту, режим ответа на команды
• Программа загрузки и самодиагностики: простая загрузка новых версий встроенного ПО и самотестировани
• Простая в использовании утилита переадресации портов и настройки для ОС Windows® NT/2000/XP
• Легкость установки на DIN рельс или в панель
• Автоматический контроль передачи данных по интерфейсу RS-485

EKI-1521 и EKI-1522 оснащены двумя независимыми Ethernet портами с разными MAC адресами, что обеспечивает их надежную работу в IP сетях. Эти модели являются последовательными шлюзами передачи данных, которые подключают устройства с интерфейсом RS-232/422/485 такие, как ПЛК, измерители, датчики и считыватели штрих кодов, к сетевой инфраструктуре. С их помощью можно подключить практически любое устройство, оснащенное последовательными портами, к Ethernet сети для одновременного доступа к нему с различных узлов. EKI-1521 и EKI-1522 поддерживают несколько режимов работы: переадресация COM порта (виртуальный COM порт), TCP сервер, IP клиент и передача данных по протоколу UDP. В режиме переадресации COM-порта стандартные последовательные операционные вызовы прозрачно перенаправляются шлюзу EKI-1521 или EKI-1522, что обеспечивает совместимость с унаследованными последовательными устройствами и существующим программным обеспечением. В режимах TCP сервер, TCP клиент и передача данных по протоколу UDP эти модели гарантируют совместимость с сетевым ПО, которое использует стандартные сетевые протоколы. Более того, с помощью EKI-1521 и EKI-1522 пользователь может организовать систему так, что последовательные устройства будут передавать данные друг другу в режиме точка-точка без необходимости использования каких-либо промежуточных управляющих компьютеров и без дополнительного программирования.

• Provides 2 x 10/100 Mbps Ethernet ports for LAN redundancy
• Provides COM port redirection (Virtual COM), TCP and UDP operation modes
• Supports up to 921.6 kbps, and any baud rate setting
• Allows a max. of 5 hosts to access one serial port
• Allows a max. of 16 hosts to be accessed as TCP client mode
• Built-in 15 KV ESD protection for all serial signals
• Provides multiple configuration methods including Windows utility, Telnet console, and Web Browser
• Supports 32-bit/64-bit Windows 2000/XP/Vista/7/8/8.1, Windows Server 2003/2008/2012, Windows CE 5.0, and Linux
• Automatic RS-485 data flow control
• Supports surge protection for D.C. power ports with line to line 2 KV, and line to earth 4 KV; for signal ports with 4 KV
• -40 ~ 70°C (-40 ~ 158°F) wide operating temperature

EKI-1521, EKI-1522 and EKI-1524 feature two independent Ethernet ports and MAC addresses to provide a redundant network mechanism to guarantee Ethernet network reliability. EKI-1521, EKI-1522 and EKI-1524 are serial device servers that connect RS-232/422/485 serial devices, such as PLC, meters, sensors, and barcode reader to an IP-based Ethernet LAN. They allow nearly any device with serial ports to connect and share an Ethernet network. EKI-1521, EKI-1522 and EKI-1524 provide various operations: COM port redirection (Virtual COMport), TCP Server, TCP Client and UDP mode. With COM port redirection mode, standard serial operation calls are transparently redirected to the EKI-1521, EKI-1522 and EKI-1524, guaranteeing compatibility with legacy serial devices and enabling backward compatibility with existing software. With TCP server, TCP client, and UDP modes, EKI-1521, EKI-1522 and EKI-1524 ensure the compatibility of network software that uses a standard network API. Moreover, you can make serial devices communicate with other devices peer-to-peer, without any intermediate host PCs and software programming.

• Provides 2 x 10/100 Mbps Ethernet ports for LAN redundancy
• Provides COM port redirection (Virtual COM), TCP and UDP operation modes
• Supports up to 921.6 kbps, and any baud rate setting
• Allows a max. of 5 hosts to access one serial port
• Allows a max. of 16 hosts to be accessed as TCP client mode
• Built-in 15 KV ESD protection for all serial signals
• Provides multiple configuration methods including Windows utility, Telnet console, and Web Browser
• Supports 32-bit/64-bit Windows 2000/XP/Vista/7/8/8.1, Windows Server 2003/2008/2012, Windows CE 5.0, and Linux
• Automatic RS-485 data flow control
• Supports surge protection for D.C. power ports with line to line 2 KV, and line to earth 4 KV; for signal ports with 4 KV
• Support isolation and wide operating temperature

EKI-1521, EKI-1522 and EKI-1524 feature two independent Ethernet ports and MAC addresses to provide a redundant network mechanism to guarantee Ethernet network reliability. EKI-1521, EKI-1522 and EKI-1524 are serial device servers that connect RS-232/422/485 serial devices, such as PLC, meters, sensors, and barcode reader to an IP-based Ethernet LAN. They allow nearly any device with serial ports to connect and share an Ethernet network. EKI-1521, EKI-1522 and EKI-1524 provide various operations: COM port redirection (Virtual COMport), TCP Server, TCP Client and UDP mode. With COM port redirection mode, standard serial operation calls are transparently redirected to the EKI-1521, EKI-1522 and EKI-1524, guaranteeing compatibility with legacy serial devices and enabling backward compatibility with existing software. With TCP server, TCP client, and UDP modes, EKI-1521, EKI-1522 and EKI-1524 ensure the compatibility of network software that uses a standard network API. Moreover, you can make serial devices communicate with other devices peer-to-peer, without any intermediate host PCs and software programming.

• Provides 2 x 10/100 Mbps Ethernet ports for LAN redundancy
• Provides COM port redirection (Virtual COM), TCP and UDP operation modes
• Supports up to 921.6 kbps, and any baud rate setting
• Allows a max. of 5 hosts to access one serial port
• Allows a max. of 16 hosts to be accessed as TCP client mode
• Built-in 15 KV ESD protection for all serial signals
• Provides rich configuration methods including Windows utility, Telnet console, and Web Browser
• Supports 32-bit/64-bit Windows 2000/XP/Vista/7, Windows Server 2003/2008, Windows CE 5.0, and Linux
• Automatic RS-485 data flow control
• Class I, Division 2 certification

EKI-1521, EKI-1522 and EKI-1524 feature two independent Ethernet ports and MAC addresses to provide a redundant network mechanism to guarantee Ethernet network reliability. EKI-1521, EKI-1522 and EKI-1524 are serial device servers that connect RS-232/422/485 serial devices, such as PLC, meters, sensors, and barcode reader to an IP-based Ethernet LAN. They allow nearly any device with serial ports to connect and share an Ethernet network. EKI-1521, EKI-1522 and EKI-1524 provide various operations: COM port redirection (Virtual COMport), TCP Server, TCP Client and UDP mode. With COM port redirection mode, standard serial operation calls are transparently redirected to the EKI-1521, EKI-1522 and EKI-1524, guaranteeing compatibility with legacy serial devices and enabling backward compatibility with existing software. With TCP server, TCP client, and UDP modes, EKI- 1521, EKI-1522 and EKI-1524 ensure the compatibility of network software that uses a standard network API. Moreover, you can make serial devices communicate with other devices peer-to-peer, without any intermediate host PCs and software programming.

• Provides 2 x 10/100 Mbps Ethernet ports for LAN redundancy
• Provides COM port redirection (Virtual COM), TCP and UDP operation modes
• Supports up to 921.6 kbps, and any baud rate setting
• Allows a max. of 5 hosts to access one serial port
• Allows a max. of 16 hosts to be accessed as TCP client mode
• Built-in 15 KV ESD protection for all serial signals
• Provides rich configuration methods including Windows utility, Telnet console, and Web Browser
• Supports 32-bit/64-bit Windows 2000/XP/Vista/7/8/8.1, Windows Server 2003/2008/2012, Windows CE 5.0, and Linux
• Automatic RS-485 data flow control
• Supports line to line 4 KV, line to ground 8 KV surge protection
• 'I' models support a wide operating temperature
• 'CI' models support isolation and wide operating temperature

EKI-1521, EKI-1522 and EKI-1524 feature two independent Ethernet ports and MAC addresses to provide a redundant network mechanism to guarantee Ethernet network reliability. EKI-1521, EKI-1522 and EKI-1524 are serial device servers that connect RS-232/422/485 serial devices, such as PLC, meters, sensors, and barcode reader to an IP-based Ethernet LAN. They allow nearly any device with serial ports to connect and share an Ethernet network. EKI-1521, EKI-1522 and EKI-1524 provide various operations: COM port redirection (Virtual COMport), TCP Server, TCP Client and UDP mode. With COM port redirection mode, standard serial operation calls are transparently redirected to the EKI-1521, EKI-1522 and EKI-1524, guaranteeing compatibility with legacy serial devices and enabling backward compatibility with existing software. With TCP server, TCP client, and UDP modes, EKI-1521, EKI-1522 and EKI-1524 ensure the compatibility of network software that uses a standard network API. Moreover, you can make serial devices communicate with other devices peer-to-peer, without any intermediate host PCs and software programming.

• Provides 2 x 10/100 Mbps Ethernet ports for LAN redundancy
• Provides COM port redirection (Virtual COM), TCP and UDP operation modes
• Supports up to 921.6 kbps, and any baud rate setting
• Allows a max. of 5 hosts to access one serial port
• Allows a max. of 16 hosts to be accessed as TCP client mode
• Built-in 15 KV ESD protection for all serial signals
• Provides rich configuration methods including Windows utility, Telnet console, and Web Browser
• Supports 32-bit/64-bit Windows 2000/XP/Vista/7/8/8.1, Windows Server 2003/2008/2012, Windows CE 5.0, and Linux
• Automatic RS-485 data flow control
• Supports line to line 4 KV, line to ground 8 KV surge protection
• 'I' models support a wide operating temperature
• 'CI' models support isolation and wide operating temperature

EKI-1521, EKI-1522 and EKI-1524 feature two independent Ethernet ports and MAC addresses to provide a redundant network mechanism to guarantee Ethernet network reliability. EKI-1521, EKI-1522 and EKI-1524 are serial device servers that connect RS-232/422/485 serial devices, such as PLC, meters, sensors, and barcode reader to an IP-based Ethernet LAN. They allow nearly any device with serial ports to connect and share an Ethernet network. EKI-1521, EKI-1522 and EKI-1524 provide various operations: COM port redirection (Virtual COMport), TCP Server, TCP Client and UDP mode. With COM port redirection mode, standard serial operation calls are transparently redirected to the EKI-1521, EKI-1522 and EKI-1524, guaranteeing compatibility with legacy serial devices and enabling backward compatibility with existing software. With TCP server, TCP client, and UDP modes, EKI-1521, EKI-1522 and EKI-1524 ensure the compatibility of network software that uses a standard network API. Moreover, you can make serial devices communicate with other devices peer-to-peer, without any intermediate host PCs and software programming.

• 8-port RS-232/422/485 serial communication
• Provides 2 x 10/100 Mbps Ethernet ports for LAN redundancy
• Supports up to 921.6 kbps, and any baud rate setting
• Provides COM port redirection (Virtual COM), TCP and UDP operation modes
• Provides rich configuration methods: Windows utility, Telnet console, Web Browser, and serial console
• Built-in 15 KV ESD protection for all serial signals
• SNMP MIB-II for network management
• Built-in buzzer for easy location
• Standard 1U rackmount size
• Rear wiring
• Automatic RS-485 data flow control

EKI-1528 and EKI-1526 are industrial-grade network-based serial device servers for connecting up to 8 or 16 serial RS-232/422/485 devices, such as CNCs, PLCs, scales and scanners, directly to a TCP/IP network. The EKI-1528 and EKI-1526 feature two independent Ethernet ports and MAC addresses to provide a redundant network mechanism to guarantee Ethernet network reliability. The EKI-1528 and EKI-1526 provide a simple and cost-effective way to bring the advantages of remote management and data accessibility to thousand of devices that can't connect to an Ethernet network. The EKI-1528 and EKI-1526 offer rich ways to configure through Windows utility, Web Browser, serial console or Telnet console, these methods make it easy manage many EKI-1528 and EKI-1526 or serial devices on your network.

• 8 or 16-port RS-232/422/485 serial communication
• Provides 2 x 10/100 Mbps Ethernet ports for LAN redundancy
• Supports up to 921.6 kbps, and any baud rate setting
• Provides COM port redirection (Virtual COM), TCP and UDP operation modes
• Provides rich configuration methods: Windows utility, Telnet console, Web Browser, and serial console
• Built-in 15 KV ESD protection for all serial signals
• SNMP MIB-II for network management
• Built-in buzzer for easy location
• Standard 1U rackmount size
• Rear wiring
• Automatic RS-485 data flow control

The EKI-1528 and EKI-1526 are industrial-grade network-based serial device servers for connecting up to 8 or 16 serial RS-232/422/485 devices, such as CNCs, PLCs, scales and scanners, directly to a TCP/IP network. The EKI-1528 and EKI-1526 feature two independent Ethernet ports and MAC addresses to provide a redundant network mechanism to guarantee Ethernet network reliability. The EKI-1528 and EKI-1526 provide a simple and cost-effective way to bring the advantages of remote management and data accessibility to thousand of devices that can't connect to an Ethernet network. The EKI-1528 and EKI-1526  offer multiple ways to configure through Windows utility, Web Browser, serial console or Telnet console, these methods make it easy manage many EKI-1528 and EKI-1526 or serial devices on your network.

• 16-port RS-232/422/485 serial communication
• Provides 2 x 10/100 Mbps Ethernet ports for LAN redundancy
• Supports up to 921.6 kbps, and any baud rate setting
• Provides COM port redirection (Virtual COM), TCP and UDP operation modes
• Provides rich configuration methods: Windows utility, Telnet console, Web Browser, and serial console
• Built-in 15 KV ESD protection for all serial signals
• SNMP MIB-II for network management
• Built-in buzzer for easy location
• Standard 1U rackmount size
• Rear wiring
• Automatic RS-485 data flow control

EKI-1528 and EKI-1526 are industrial-grade network-based serial device servers for connecting up to 8 or 16 serial RS-232/422/485 devices, such as CNCs, PLCs, scales and scanners, directly to a TCP/IP network. The EKI-1528 and EKI-1526 feature two independent Ethernet ports and MAC addresses to provide a redundant network mechanism to guarantee Ethernet network reliability. The EKI-1528 and EKI-1526 provide a simple and cost-effective way to bring the advantages of remote management and data accessibility to thousand of devices that can't connect to an Ethernet network. The EKI-1528 and EKI-1526 offer rich ways to configure through Windows utility, Web Browser, serial console or Telnet console, these methods make it easy manage many EKI-1528 and EKI-1526 or serial devices on your network.

• 8 or 16-port RS-232/422/485 serial communication
• Provides 2 x 10/100 Mbps Ethernet ports for LAN redundancy
• Supports up to 921.6 kbps, and any baud rate setting
• Provides COM port redirection (Virtual COM), TCP and UDP operation modes
• Provides rich configuration methods: Windows utility, Telnet console, Web Browser, and serial console
• Built-in 15 KV ESD protection for all serial signals
• SNMP MIB-II for network management
• Built-in buzzer for easy location
• Standard 1U rackmount size
• Rear wiring
• Automatic RS-485 data flow control

The EKI-1528 and EKI-1526 are industrial-grade network-based serial device servers for connecting up to 8 or 16 serial RS-232/422/485 devices, such as CNCs, PLCs, scales and scanners, directly to a TCP/IP network. The EKI-1528 and EKI-1526 feature two independent Ethernet ports and MAC addresses to provide a redundant network mechanism to guarantee Ethernet network reliability. The EKI-1528 and EKI-1526 provide a simple and cost-effective way to bring the advantages of remote management and data accessibility to thousand of devices that can't connect to an Ethernet network. The EKI-1528 and EKI-1526  offer multiple ways to configure through Windows utility, Web Browser, serial console or Telnet console, these methods make it easy manage many EKI-1528 and EKI-1526 or serial devices on your network.

• Сетевой порт 10/100Base-T Ethernet
• Скорость передач данных до 230 Кбит/с
• Улучшенный механизм защиты для предотвращения несанкционированного доступа
• Автоматическое восстановление подключения к сети
• Возможность удаленной загрузки новых версий встроенного ПО
• Функция автоопределения сетевого интерфейса
• Удобная программа для настройки портов
• Драйверы для ОС Windows® 98/NT/2000/XP
• Защита от перенапряжения на линиях передачи данных по протоколу RS-485 и подачи питания
• Автоматический контроль передачи данных по интерфейсу RS-485

• Supports RS-232 serial communication
• Provides 10/100 Mbps auto-sensing Ethernet port
• Supports baud rate up to 921.6 kbps
• Provides COM port redirection (Virtual COM) mode
• Allows a max. of 5 hosts to access one serial port
• Supports auto re-connection function
• Supports Windows 2000/XP/Vista drivers
• Built-in 15 KV ESD protection for all serial signals
• Supports remote update firmware

ADAM-4571 and ADAM-4571L are fast and cost effective data gateways between serial and Ethernet interfaces. The units also bring the advantages of remote management and dataaccessibility to RS-232/422/485 devices. The transmission speed of the units is up to 230 kbps, meeting the demands for high-speed data exchanges. In addition, you can useWindows utility to configure ADAM-4571 and ADAM-4571L without further programming. The units not only protect your current hardware investment but also ensure future networkexpandability. Since the protocol conversion is transparent, all your existing devices can be seamlessly integrated with an Ethernet network. Therefore, ADAM-4571 and ADAM-4571Lcan be used in security systems, factory automation, SCADA, transportation and more. ADAM-4571 and ADAM4571L link both your existing human-machine interface(HMI) PC andyour RS-232/422/485 devices with Ethernet cables.ADAM-4571 and ADAM-4571L come with a Windows configuration and port-mapping utility. The configuration tool can auto-detect all Ethernet Data Gateway devices on the localnetwork, and let you adjust all settings. The port mapping utility helps you to setup up COM ports for Windows NT/2000/XP platform. This helps you configure all ports to meetyour needs.

• Supports RS-232/422/485 serial communication
• Provides 10/100 Mbps auto-sensing Ethernet port
• Supports baud rate up to 921.6 kbps
• Provides COM port redirection (Virtual COM), TCP and UDP operation modes
• Allows a max. of 5 hosts to access one serial port
• Allows a max. of 16 hosts to be accessed as TCP client mode
• Supports auto re-connection function
• Built-in 15 KV ESD protection for all serial signals
• Automatic RS-485 data flow control
• Supports remote update firmware

ADAM-4571 and ADAM-4571L are fast and cost effective data gateways between serial and Ethernet interfaces. The units also bring the advantages of remote management and dataaccessibility to RS-232/422/485 devices. The transmission speed of the units is up to 230 kbps, meeting the demands for high-speed data exchanges. In addition, you can useWindows utility to configure ADAM-4571 and ADAM-4571L without further programming. The units not only protect your current hardware investment but also ensure future networkexpandability. Since the protocol conversion is transparent, all your existing devices can be seamlessly integrated with an Ethernet network. Therefore, ADAM-4571 and ADAM-4571Lcan be used in security systems, factory automation, SCADA, transportation and more. ADAM-4571 and ADAM4571L link both your existing human-machine interface(HMI) PC andyour RS-232/422/485 devices with Ethernet cables.ADAM-4571 and ADAM-4571L come with a Windows configuration and port-mapping utility. The configuration tool can auto-detect all Ethernet Data Gateway devices on the localnetwork, and let you adjust all settings. The port mapping utility helps you to setup up COM ports for Windows NT/2000/XP platform. This helps you configure all ports to meet

• Supports RS-232 serial communication
• Provides 10/100 Mbps auto-sensing Ethernet port
• Supports baud rate up to 921.6 kbps
• Provides COM port redirection (Virtual COM) mode
• Allows a max. of 5 hosts to access one serial port
• Supports auto re-connection function
• Supports Windows 2000/XP/Vista drivers
• Built-in 15 KV ESD protection for all serial signals
• Supports remote update firmware

The ADAM-4571L provides a robust and cost effective way to network-enable equipment in an industrial automation environment. It also brings the advantages of remote management and data accessibility to RS-232 devices. The transmission speed of the ADAM-4571L is up to 921.6 Kbps, meeting the demands for high-speed data exchanges. By encapsulating serial data and transporting it over Ethernet, the ADAM-4571L allows virtual serial links over TCP/IP networks. After Advantech Serial Device Server Configuration Utility installation, standard serial operation calls are transparently redirected to the serial device server, guaranteeing compatibility with legacy serial devices and enabling backward compatibility with existing software. The ADAM-4571L comes with a Windows configuration utility. The configuration tool can auto-detect all serial device servers on the local network, and let you adjust all settings. The configuration utility merges the port mapping function to helps you to setup Virtual COM ports for Windows 2000/XP/Vista(x86) platform. This helps you configure all ports to meet your needs.