Miniature 10/100 Mbps Copper to Fiber Media Converters

The MiniMc LFPT family is one of the industry’s smallest media converters measuring only 3.5 x 2 inches and offers Link Fault Pass Through (LFPT) for ease of troubleshooting fault conditions. Copper distances can be extended 2 km to 80 km with DIN Rail or rack mount bracket mounting options.

• 1 SFP fiber port
• One 10/100 Base-TX twisted pair port
• AutoCross automatic selection between crossover or straight-through connection
• Supports Link Fault Pass Through

Measuring less than 88.9mm (3.5 inches) deep and 50.8mm (2 inches) wide, the MiniMc LFPT is one of the industry’s smallest media converters with both data connections on the same side of the unit. An optional fiber SFP port gives network operators the flexibility to upgrade network equipment to different fiber interfaces. Link Fault Pass Through (LFPT) can be enabled/disabled via a DIP Switch on the unit, and is a useful diagnostic feature that assists the network administrator in indicating a fault condition on a given segment between the interfaces. The MiniMc LFPT extends 10 and 100 Mbps twisted pair network segments up to 80 km over fiber. Both a media and data rate converter, the MiniMc LFPT features 10/100 Auto Negotiation on the copper port while the fiber port operates at 100 Mbps full duplex. MiniMc LFPT 10/100 switching fiber converters are ideal for all premises, FTTD, LAN-to-LAN or LAN-to-MAN fiber networking applications.

• One 100 Mbps FDX fiber port
• One 10/100 Base-TX twisted pair port
• AutoCross automatic selection between crossover or straight-through connection
• Supports Link Fault Pass Through

Media conversion is the most cost-effective solution for extending the productive life of legacy wiring plants and equipment while allowing implementation of new technologies. Measuring less than 88.9 mm deep and 50.8 mm wide, the MiniMc LFPT is one of the industry’s smallest media converters with both data connections on the same side of the unit. Link Fault Pass Through (LFPT) can be enabled/disabled via a DIP Switch on the unit, and is a useful diagnostic feature that assists the network administrator in indicating a fault condition on a given segment between the interfaces. The BB-855-11621 MiniMc LFPT extends 10 and 100 Mbps twisted pair network segments up to 2 km over fiber. Both a media and data rate converter, the MiniMc LFPT features 10/100 Auto Negotiation on the copper port while the fiber port operates at 100 Mbps full duplex. MiniMc LFPT 10/100 switching fiber converters are ideal for all premises, FTTD, LAN-to-LAN or LAN-to-MAN fiber networking applications.

• Extended operating temperature of -40 to +85° C
• Auto-Cross automatic selection between crossover or straight-through connections
• Status LEDs
• Link Fault Pass-Through (LFPT) capability

Measuring less than 80.9mm (3.5 inches) deep and 50.8mm (2 inches) wide, the IE-MiniMc Series converters are some of the industry’s smallest copper-to-fiber media converters, with both data connections on the same side. The IE-MiniMc family of media converters are a fraction of the cost of other industrial grade alternatives. These products provide the ease and convenience of plug-and-play operation with features including Auto Negotiation and Auto-Cross. Advanced features such as Link Fault Pass-Through (LFPT) assist operators in identifying breaks in the network when using unmanaged network hardware. Multiple powering options include Power over Ethernet (PoE/PD), -48 VDC for Telco, AC wall adapter and USB, which offers unsurpassed flexibility for a variety of installations.