• Телефон отдела продаж: 8 (800) 700-25-97
  • Email: sales@prompc.info
  • Санкт-Петербург, пр. Александровской Фермы, 29, Бизнес-центр Эврика, офис 222В

Неуправляемые промышленные Ethernet-коммутаторы

Неуправляемые промышленные Ethernet-коммутаторы разработаны специально для применения в сложных промышленных условиях и предлагают не только непревзойденную производительность и высокую надежность, но и приемлемую стоимость. Коммутаторы не требуют какой-либо настройки, они полностью готовы к работе поскольку работают в режиме plug-and-play. Линейка неуправляемых Ethernet-коммутаторов представлена моделями со стандартными скоростям передачи данных 10/100 Мбит/с и с гигабитными скоростями 10/100/1000 Мбит/с, имеются варианты для подключения к проводным и волоконно-оптическим сетям.

EKI-2525

5-port Unmanaged Industrial Ethernet Switch
 
 
  • Provides 5/8 Fast Ethernet ports with Auto MDI/MDI-X
  • Supports 10/100 Mbps Auto-Negotiation
  • Provides broadcast storm protection
  • Provides compact size with DIN-rail/Wall mount, and IP30 metal mechanism
  • Supports redundant 12 ~ 48 VDC power input and P-Fail relay

The EKI-2525/2528 supports a Fast Ethernet solution. The power is a 12 ~ 48 VDC redundant input design, and is secured with a double protection mechanism: Power Polarity Reverse Protect and an Overload Current Resetable Fuse. The former tolerates reverse power wiring while the later secures the system from overload currents. As the power supply turns normal, EKI-2525/2528 will automatically get back to work. Each port of EKI-2525/2528 has 2 LED’s to show the link status transmission speed and collision status. It also provides a relay output for an event alarm. In the event of a power failure, the built-in LED will activate the alarm to notify administrators. Engineers can simply verify the hardware status by checking the LED, and have troubleshooting easy and quick. EKI-2525/2528 comes with compact metal housing that rates IP30 to help against from dusty industrial environments.

EKI-2525I

5-port Unmanaged Industrial Ethernet Switch w/ Wide Temp
 
 
  • Provides 5/8 Fast Ethernet ports with Auto MDI/MDI-X
  • Supports 10/100 Mbps Auto-Negotiation
  • Provides broadcast storm protection
  • Provides compact size with DIN-rail/Wall mount, and IP30 metal mechanism
  • Supports redundant 12 ~ 48 VDC power input and P-Fail relay
  • Supports wide operating temperatures from -40 to 75°C

EKI-2525M

4+1 100FX Port Multi-Mode Unmanaged Industrial Ethernet Switch
 
 
  • Provides 4 x 10/100 Mbps Ethernet ports with RJ45 connector
  • Provides 1 x 100 Mbps Multi-mode SC type fiber optic port
  • Supports full/half duplex flow control
  • Supports MDI/MDI-X auto crossover
  • Provides broadcast storm protection
  • Provides redundant 12 ~ 48 VDC power input
  • Provides flexible mounting: DIN-rail and Wall mount

EKI-2525M/2526M/2526S are industrial-grade Ethernet switches that enable you to expand your industrial network fast and cost-effectively. The EKI-2525M/2526M/2526S have four 10/100 Mbps Ethernet ports, and additionally the EKI-2525M/2526M provides one or two multi-mode fiber-optic ports, while the EKI-2526S provides two single-mode fiber-optic ports. Using fiber-optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 30 km) transmissions.
EKI-2525M/2526M/2526S have industrial-grade designs, assuring high reliability and stability in harsh environments, making it a robust bridge between enterprise fiber-optic backbones and Ethernet devices. EKI-2525M/2526M/2526S includes a switch controller that can automatically sense transmission speeds. The RJ45 interface can also be autodetected, so MDI or MDI-X is automatically selected and a crossover cable is not required. All the Ethernet ports have memory buffers that support the store and forward mechanism, assuring all data is transmitted properly.

EKI-2526M

4+2 100FX Port Unmanaged Industrial Ethernet Switch
 
 
  • Provides 4 x 10/100 Mbps Ethernet ports with RJ45 connector
  • Provides 2 x 100 Mbps Multi-mode SC type fiber optic port
  • Supports full/half duplex flow control
  • Supports MDI/MDI-X auto crossover
  • Provides broadcast storm protection
  • Provides Redundant 12 ~ 48 VDC power input
  • Provides flexible mounting: DIN-rail and Wall mount

EKI-2526S

4+2 100FX Port Single Mode Unmanaged Industrial Ethernet Switch
 
 
  • Provides 4 x 10/100 Mbps Ethernet ports with RJ45 connector
  • Provides 2 x 100 Mbps Single-mode SC type fiber optic port
  • Supports full/half duplex flow control
  • Supports MDI/MDI-X auto crossover
  • Provides broadcast storm protection
  • Provides Redundant 12 ~ 48 VDC power input
  • Provides flexible mounting: DIN-rail and Wall mount

EKI-2525M/2526M/2526S are industrial-grade Ethernet switches that enable you to expand your industrial network fast and cost-effectively. The EKI-2525M/2526M/2526S have four 10/100 Mbps Ethernet ports, and additionally the EKI-2525M/2526M provides one or two multi-mode fiber-optic ports, while the EKI-2526S provides two single-mode fiber-optic ports. Using fiber-optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 30 km) transmissions.
EKI-2525M/2526M/2526S have industrial-grade designs, assuring high reliability and stability in harsh environments, making it a robust bridge between enterprise fiber-optic backbones and Ethernet devices. EKI-2525M/2526M/2526S includes a switch controller that can automatically sense transmission speeds. The RJ45 interface can also be autodetected, so MDI or MDI-X is automatically selected and a crossover cable is not required. All the Ethernet ports have memory buffers that support the store and forward mechanism, assuring all data is transmitted properly.

EKI-2528

8-port Unmanaged Industrial Ethernet Switch
 
 
  • Provides 5/8 Fast Ethernet ports with Auto MDI/MDI-X
  • Supports 10/100 Mbps Auto-Negotiation
  • Provides broadcast storm protection
  • Provides compact size with DIN-rail/Wall mount, and IP30 metal mechanism
  • Supports redundant 12 ~ 48 VDC power input and P-Fail relay

The EKI-2525/2528 supports a Fast Ethernet solution. The power is a 12 ~ 48 VDC redundant input design, and is secured with a double protection mechanism: Power Polarity Reverse Protect and an Overload Current Resetable Fuse. The former tolerates reverse power wiring while the later secures the system from overload currents. As the power supply turns normal, EKI-2525/2528 will automatically get back to work. Each port of EKI-2525/2528 has 2 LED’s to show the link status transmission speed and collision status. It also provides a relay output for an event alarm. In the event of a power failure, the built-in LED will activate the alarm to notify administrators. Engineers can simply verify the hardware status by checking the LED, and have troubleshooting easy and quick. EKI-2525/2528 comes with compact metal housing that rates IP30 to help against from dusty industrial environments.

EKI-2528I

8-port Unmanaged Industrial Ethernet Switch w/ Wide Temp
 
 
  • Provides 5/8 Fast Ethernet ports with Auto MDI/MDI-X
  • Supports 10/100 Mbps Auto-Negotiation
  • Provides broadcast storm protection
  • Provides compact size with DIN-rail/Wall mount, and IP30 metal mechanism
  • Supports redundant 12 ~ 48 VDC power input and P-Fail relay
  • Supports wide operating temperatures from -40 to 75°C

The EKI-2525/2528 supports a Fast Ethernet solution. The power is a 12 ~ 48 VDC redundant input design, and is secured with a double protection mechanism: Power Polarity Reverse Protect and an Overload Current Resetable Fuse. The former tolerates reverse power wiring while the later secures the system from overload currents. As the power supply turns normal, EKI-2525/2528 will automatically get back to work. Each port of EKI-2525/2528 has 2 LED’s to show the link status transmission speed and collision status. It also provides a relay output for an event alarm. In the event of a power failure, the built-in LED will activate the alarm to notify administrators. Engineers can simply verify the hardware status by checking the LED, and have troubleshooting easy and quick. EKI-2525/2528 comes with compact metal housing that rates IP30 to help against from dusty industrial environments.

EKI-2725

5-port Gigabit Unmanaged Industrial Ethernet Switch
 
 
  • Provides 5 Gigabit Ethernet ports with Auto MDI/MDI-X
  • Supports 10/100/1000Mbps Auto Negotiation
  • Supports jumbo frame transmission up to 9kbytes
  • Provides Slim size, DIN-rail with IP30 metal mechanism
  • Supports Redundant 12 ~ 48 VDC power input and P-Fail Relay
  • Provides broadcast storm protection

EKI-2728

8-port Gigabit Unmanaged Industrial Ethernet Switch
 
 
  • Provides 8 Gigabit Ethernet ports with Auto MDI/MDI-X
  • Supports 10/100/1000Mbps Auto Negotiation
  • Supports jumbo frame transmission up to 9kbytes
  • Provides Slim size, DIN-rail with IP30 metal mechanism
  • Supports Redundant 12 ~ 48 VDC power input and P-Fail Relay
  • Provides broadcast storm protection

EKI-2728I

8-port Gigabit Unmanaged Industrial Ethernet Switch
 
 
  • Provides 5/8 Gigabit Ethernet ports with Auto MDI/MDI-X
  • Supports 10/100/1000Mbps Auto Negotiation
  • Supports jumbo frame transmission up to 9kbytes
  • Provides Slim size, DIN-rail with IP30 metal mechanism
  • Supports Redundant 12 ~ 48 VDC power input and P-Fail Relay
  • Provides broadcast storm protection
  • Supports a wide temperature range: -40 ~ 75° C

The EKI-2725/2728 supports Gigabit Ethernet. The power is a 12 ~ 48 VDC redundant input design, and is secured with a double protection mechanism: Power Polarity Reverse Protect and an Overload Current Resetable Fuse. The former tolerates reverse power wiring while the later secures the system from overload currents. As the power supply turns normal, EKI-2725/2728 will automatically get back to normal operation state. Each port of EKI-2725/2728 has 2 LED’s to show the link status transmission speed and collision status. It also provides a relay output for an event alarm. In the event of a power failure, the built-in LED will activate the alarm to notify administrators. Engineers can simply verify the hardware status by checking the LED, and have troubleshooting easy and quick. EKI-2725/2728 comes with compact metal housing that rates IP30 to help against from dusty industrial environments.

EKI-2728MI

6Gx+2 Multi-Mode Unmanaged Ethernet Switch with Wide Temperature
 
 
  • 6 Gigabit Ethernet ports with auto negotiation and 2 Gigabit fiber optic ports
  • Supports jumbo frame transmission up to 9k bytes
  • Provides slim size, DIN-rail with IP30 metal mechanism
  • Provides broadcast storm protection
  • Supports 5.49% power consumption
  • Redundant DC power supply and one removable AC power input

EKI-2728MI is a cost effective unmanaged industrial Ethernet switch which supports Giga Ethernet. It supports Green Power requirement, furthermore, EKI-2728MI also supports advanced network standards to optimize network performance, reduce maintenance cost, and secure network safety.

EKI-3525

5-port 10/100Mbps Unmanaged Industrial Ethernet Switch
 
 
  • Supports IEEE 802.3az, Energy Efficient Ethernet standard -Automatically powers down ports that have no link -Budgets power output for different Ethernet cable length
  • Support IEEE 802.1p QoS- VIP port setting -Ensures time sensitive data gets delivered efficiently, even during bursts of high data traffic. -Ensures video streaming through switch with high priority.
  • Supports redundant 12 ~ 48 VDC power input and P-Fail relay
  • In Loop detection

EKI-3528

8-port 10/100Mbps Unmanaged Industrial Ethernet Switch
 
 
  • Supports IEEE 802.3az, Energy Efficient Ethernet standard - Automatically powers down ports that have no link - Budgets power output for different Ethernet cable length
  • Support IEEE 802.1p QoS- VIP port setting - Ensures time sensitive data gets delivered efficiently, even during bursts of high data traffic. - Ensures video streaming through switch with high priority.
  • Supports redundant 12 ~ 48 VDC power input and P-Fail relay
  • In Loop detection

The EKI-3525/3528 are a new generation products with green Ethernet design. They feature green solutions that automatically adjust power consumption by detecting the link status and cable length. Designed with 1/2 "VIP" ports to get optimal bandwidth for media traffics through VIP ports users can experience better performance of multimedia streaming preferred through prioritized bandwidth setting. The devices come with compact metal and plastic housing that is IP40 rated to protect against dusty industrial environments. The wide power input power (8.4 to 52.4 VDC) is dedicated to operate in areas of unstable power and rugged environments. It also provides an event alarm and in the event of a power failure and connection loop, the intergrated LED will activate the alarm to notify administrators.

EKI-3725

5-port Gigabit Unmanaged Industrial Ethernet Switch
 
 
  • Supports IEEE 802.3az, Energy Efficient Ethernet standard -Automatically powers down ports that have no link -Budgets power output for different Ethernet cable length
  • Support IEEE 802.1p QoS- VIP port setting-Ensures time sensitive data gets delivered efficiently, even during bursts of high data traffic. -Ensures video streaming through switch with high priority.
  • Supports 9,216 Byte Jumbo Frames
  • Supports redundant 12 ~ 48 VDC power input and P-Fail relay
  • In Loop detection

EKI-3728

8-port Gigabit Unmanaged Industrial Ethernet Switch
 
 
  • Supports IEEE 802.3az, Energy Efficient Ethernet standard -Automatically powers down ports that have no link -Budgets power output for different Ethernet cable length
  • Support IEEE 802.1p QoS- VIP port setting -Ensures time sensitive data gets delivered efficiently, even during bursts of high data traffic. -Ensures video streaming through switch with high priority.
  • Supports 9,216 Byte Jumbo Frames
  • Supports redundant 12 ~ 48 VDC power input and P-Fail relay
  • In Loop detection

The EKI-3725/3728 are a new generation products with green Ethernet design. They feature green solutions that automatically adjust power consumption by detecting the link status and cable length. Designed with 1/2 "VIP" ports to get optimal bandwidth for media traffics through VIP ports users can experience better performance of multimedia streaming
preferred through prioritized bandwidth setting. The devices come with compact metal and plastic housing that is IP40 rated to protect against dusty industrial environments. The wide power input power (8.4 to 52.4 VDC) is dedicated to operate in areas of unstable power and rugged environments. It also provides an event alarm and in the event of a power failure and connection loop, the intergrated LED will activate the alarm to notify administrators.

EKI-4524I

24-port Ethernet Switch with Wide Temperature
 
 
  • Backplane (Switching Fabric): 4.8 Gbps
  • Provides 8K MAC address
  • Supports 100 ~ 240 VAC/ VDC power input and power relay alarm
  • Front panel LEDs simplify the monitoring and management
  • Wide operating temperature -40 ~ 75° C
  • 1U 19" rack mount design

EKI-4524RI

24+2 SFP Port Unmanaged Industrial Ethernet Switch with Wide Temperature
 
 
  • Backplane (Switching Fabric): 4.8 Gbps
  • Provides 8K MAC address
  • Supports 100 ~ 240 VAC/ VDC power input and power relay alarm
  • Front panel LEDs simplify the monitoring and management
  • Rear-end wiring with LED indicator
  • Wide operating temperature -40 ~ 75° C
  • 1U 19" rack mount design

EKI-4524I/4524RI is designed for power automation systems and supports 24 Fast Ethernet ports and 2 x 100Base-TX SFP slots for different SFP modules in any application. EKI-4524I/4524RI has wide range voltage power input which provides convenient and uninterrupted power supply. EKI-4524RI has two sides (Front and Rear) LED indicator to show the link status conveniently. It also provides relay output for an event alarm. Quick notification and fast response time can shorten service procedures and reduce data loss in the field.

EKI-7526I

16-port Unmanaged Industrial Ethernet Switch with Wide Temperature
 
 
  • Provides 16 10/100Mbps Ethernet ports with RJ-45 connector
  • Supports Auto Negotiation and Auto MDI/MDI-X
  • Provides flexible mounting: DIN-rail, Wall Mounting
  • Supports Dual 12 ~ 48 VDC power input and 1 relay output
  • Supports wide operating temperature (-40~75° C)

EKI-7526I and EKI-7526MI are cost effective Unmanaged industrial Ethernet switches which support 16 x 10/100Base-TX fast Ethernet ports. The long MTBF (Mean Time Between Failures) ensures low operation and maintenance costs. All Ethernet ports have memory buffers that support the store-and-forward mechanism, which assures that data can be transmitted properly. Both EKI-7526MI and EKI-7526I support advanced network standards to optimize network performance, reduce maintenance costs, and secure network safety.

EKI-7529MI

8+2 Multi-mode Fiber Optic Industrial Unmanaged Ethernet Switch with Wide Temperature
 
 
  • Provides SC or ST type fiber optic ports plus 8 Fast Ethernet ports
  • Supports Auto Negotiation and Auto MDI/MDI-X
  • Provides flexible mounting: DIN-rail or wallmounting
  • Supports Dual 12 ~ 48 VDC power input and 1 relay output
  • Enable or disable broadcast storm protection through a simple dip switch
  • Supports wide operating temperatures (-40 ~ 75° C)

Aside from 2 SC or ST type ports, the EKI-7529MI or EKI-7529MI/ST come equipped with 8 x 10/100Base-TX fast Ethernet ports. Traditional SC or ST fiber optic ports can be used for uplinking and long distance transmissions to flexibly fit field requests. The RJ-45 interface can also be auto-detected, so MDI or MDI-X is automatically selected and a cross-over cable is not required. All Ethernet ports have memory buffers that support the store-and-forward mechanism, which assures that data can be transmitted properly. Furthermore, the power line of EKI-7529MI or EKI-7529MI/ST supports Surge and EFT protection which secure equipment against unregulated voltage and make systems safer and more reliable.

EKI-7626C

16+2G Combo Port Gigabit Unmanaged Industrial Ethernet Switch
 
 
  • Provides 2 Gigabit Copper/SFP combo port plus 16 Fast Ethernet ports
  • SFP socket for Easy and Flexible Fiber Expansion
  • Supports Auto Negotiation and Auto MDI/MDI-X
  • Supports 4,000 VDC Ethernet ESD protection
  • Supports 3,000 VDC surge (EFT) protection for power line
  • Provides flexible mounting: DIN-rail, Wall Mounting
  • Supports Dual 12 ~ 48 VDC power input and 1 relay output

Aside from 2 Gigabit fiber optic/copper combo ports, the EKI-7626C comes equipped with 16 x 10/100Base-TX fast Ethernet ports. Traditional RJ-45 ports can be used for uplinking wide-band paths in short distance(< 100m), or the appropriate replaceable SFP module can be used for the application of wide band uploading and long distance transmissions to fit the field request flexibly. Also, the long MTBF (Mean Time Betwen Failures) ensures that the EKI-7626C wii continue to operate until a Gigabit network infrastructure has been established, without requiring any extra upgrade costs. EKI-7626C includes a switch controller that can automatically sense transmission speeds (10/100 Mbps) The RJ-45 interface can also be auto-detected, so MDI or MDI-X is automatically selected and a cross-over cable is not required. All Ethernet ports have memory buffers that support the store-and -forward mechanism, which assures that data can be transmitted properly. Furthemore, the power line of EKI-7626C supports up to 3,000 VDC surge(EFT) protection, which secure equipment against unregulated voltage and make systems safer and more reliable.

EKI-7626CI

16+2G Combo Port Gigabit Unmanaged Industrial Ethernet Switch
 
 
  • Provides 2 Gigabit Copper/SFP combo port plus 16 Fast Ethernet ports
  • SFP socket for Easy and Flexible Fiber Expansion
  • Supports Auto Negotiation and Auto MDI/MDI-X
  • Supports 4,000 VDC Ethernet ESD protection
  • Supports 3,000 VDC surge (EFT) protection for power line
  • Provides flexible mounting: DIN-rail, Wall Mounting
  • Supports Dual 12 ~ 48 VDC power input and 1 relay output
  • Supports wide operating temperatures from -40 ~ 75° C

Aside from 2 Gigabit fiber optic/copper combo ports, the EKI-7626C comes equipped with 16 x 10/100Base-TX fast Ethernet ports. Traditional RJ-45 ports can be used for uplinking wide-band paths in short distance(< 100m), or the appropriate replaceable SFP module can be used for the application of wide band uploading and long distance transmissions to fit the field request flexibly. Also, the long MTBF (Mean Time Betwen Failures) ensures that the EKI-7626C wii continue to operate until a Gigabit network infrastructure has been established, without requiring any extra upgrade costs. EKI-7626C includes a switch controller that can automatically sense transmission speeds (10/100 Mbps) The RJ-45 interface can also be auto-detected, so MDI or MDI-X is automatically selected and a cross-over cable is not required. All Ethernet ports have memory buffers that support the store-and -forward mechanism, which assures that data can be transmitted properly. Furthemore, the power line of EKI-7626C supports up to 3,000 VDC surge(EFT) protection, which secure equipment against unregulated voltage and make systems safer and more reliable.

EKI-7629C

8+2G Combo Port Gigabit Unmanaged Industrial Ethernet Switch
 
 
  • Provides 2 Gigabit Copper/SFP combo port plus 8 Fast Ethernet ports
  • SFP socket for Easy and Flexible Fiber Expansion
  • Supports Auto Negotiation and Auto MDI/MDI-X
  • Supports 4,000 VDC Ethernet ESD protection
  • Supports 3,000 VDC surge (EFT) protection for power line
  • Provides flexible mounting: DIN-rail, Wall Mounting
  • Supports Dual 12 ~ 48 VDC power input and 1 relay output

EKI-7629CI

8+2G Combo Port Gigabit Unmanaged Industrial Ethernet Switch w/ Wide Temp
 
 
  • SFP socket for Easy and Flexible Fiber Expansion
  • Supports Auto Negotiation and Auto MDI/MDI-X
  • Supports 4,000 VDC Ethernet ESD protection
  • Supports 3,000 VDC surge (EFT) protection for power line
  • Provides flexible mounting: DIN-rail, Wall Mounting
  • Supports Dual 12 ~ 48 VDC power input and 1 relay output
  • Supports wide operating temperatures from -40 ~ 75° C

Aside from 2 Gigabit fiber optic/copper combo ports, the EKI-7629C comes equipped with 8 x 10/100Base-TX fast Ethernet ports. Traditional RJ-45 ports can be used for uplinking wide-band paths in short distance(< 100m), or the appropriate replaceable SFP module can be used for the application of wide band uploading and long distance transmissions to fit the field request flexibly. Also, the long MTBF (Mean Time Betwen Failures) ensures that the EKI-7629C wii continue to operate until a Gigabit network infrastructure has been established, without requiring any extra upgrade costs. EKI-7629C includes a switch controller that can automatically sense transmission speeds (10/100 Mbps) The RJ-45 interface can also be auto-detected, so MDI or MDI-X is automatically selected and a cross-over cable is not required. All Ethernet ports have memory buffers that support the store-and -forward mechanism, which assures that data can be transmitted properly. Furthemore, the power line of EKI-7629C supports up to 3,000 VDC surge(EFT) protection, which secure equipment against unregulated voltage and make systems safer and more reliable.

EKI-7629CP

8+2G Combo Port Gigabit Unmanaged Industrial Ethernet PoE Switch
 
 
  • Provides 2 Gigabit Copper/SFP combo port plus 8 PoE injector ports
  • SFP socket for Easy and Flexible Fiber Expansion
  • Supports Auto Negotiation and Auto MDI/MDI-X
  • Provides flexible mounting: DIN-rail and Wall mount
  • Supports Dual 48 VDC power input and 1 relay output
  • Supports wide operating temperatures from -10 ~ 60°C

Aside from 2 Gigabit fiber optic/copper combo ports, the EKI-7629CP/CPI comes equipped with 8 x 10/100Base-TX fast Ethernet PoE injector ports. Traditional RJ45 ports can be used for up-linking wide-band paths in short distances ( that can automatically sense transmission speeds (10/100 Mbps) The RJ45 interface can also be auto-detected, so MDI or MDI-X is automatically selected and a cross-over cable is not required. All Ethernet ports have memory buffers that support the store-and-forward mechanism, which assures that data can be transmitted properly.

EKI-7629CPI

8+2G Combo Port Gigabit Unmanaged Industrial Ethernet PoE Switch
 
 
  • Provides 2 Gigabit Copper/SFP combo port plus 8 PoE injector ports
  • SFP socket for Easy and Flexible Fiber Expansion
  • Supports Auto Negotiation and Auto MDI/MDI-X
  • Provides flexible mounting: DIN-rail and Wall mount
  • Supports Dual 48 VDC power input and 1 relay output
  • Supports wide operating temperatures from -40 to 75°C

Aside from 2 Gigabit fiber optic/copper combo ports, the EKI-7629CP/CPI comes equipped with 8 x 10/100Base-TX fast Ethernet PoE injector ports. Traditional RJ45 ports can be used for up-linking wide-band paths in short distances ( that can automatically sense transmission speeds (10/100 Mbps) The RJ45 interface can also be auto-detected, so MDI or MDI-X is automatically selected and a cross-over cable is not required. All Ethernet ports have memory buffers that support the store-and-forward mechanism, which assures that data can be transmitted properly.

ADAM-6520

5-port Industrial 10/100 Mbps Ethernet Switch
 
 
  • Supports full/half duplex flow control
  • Supports MDI/MDI-X auto crossover
  • Provides broadcast storm protection
  • Embedded with a switch controller, supports auto-negotiation
  • Supports +10 ~ 30 VDC voltage power input
  • Provides surge (EFT) protection 3000VDC for power line (ADAM-6520L not equipped)
  • Supports 4,000 VDC Ethernet ESD protection (ADAM-6520L not equipped)
  • Provides flexible mounting: DIN-rail, Wall, Stack
  • Supports wide operating temperature range : -40 ~ 85° C (ADAM-6520)

ADAM-6520 is a 5-port industrial-grade switch with Ethernet connectivity and from 10 to 100 Mbps transfer rates(Auto-negotiation). Just like any other product in the ADAM family, ADAM-6520 can be mounted in three different ways: DIN rail, Wall and Stack. Solid industrial-grade design assures reliable operation in common application areas like: semi-conductor factories, inventory control environments, assembly lines, manufacturing and many more. All modules support a wide voltage range of +10 ~ 30 VDC over the terminal block, and 3,000 VDC surge (EFT) protection ensures that over-voltage is no concern. The wide operating temperature of ADAM-6520 goes from -10 ~ 70°, while ADAM-6520I from -40 ~ 85°. This permits them to be functional in harsh environments. The six inclusive LED indicators make troubleshooting of the modules easier. Each port has a pair of LEDs that indicate link status and port activities. This easily informs users of any collisions, the link status, power failure and data receipts for immediate on-site diagnosis.

ADAM-6520I

5-port Industrial 10/100 Mbps Ethernet Switch w/ Wide Operating Temperature
 
 
  • Supports full/half duplex flow control
  • Supports MDI/MDI-X auto crossover
  • Provides broadcast storm protection
  • Embedded with a switch controller, supports auto-negotiation
  • Supports +10~30 VDC for power input
  • Provides surge protection 3,000 VDC for power line
  • Supports 4,000 VDC Ethernet ESD protection
  • Provides flexible mounting: DIN-rail, Wall, Stack
  • Supports wide operating temperature range: -40 ~ 85° C

ADAM-6520I is a 5-port industrial-grade switch with Ethernet connectivity and 10/100 Mbps transmission speed. Just like any other in the ADAM® family, ADAM-6520I can be mounted in three different ways: DIN-rail, wall and stack. ADAM-6520I supports wider operating temperature ranges from -40°C up to 85°C while the ADAM-6520 from -10~70°C.

ADAM-6520L

5-port Industrial 10/100 Mbps Unmanaged Ethernet Switch
 
 
  • Supports full/half duplex flow control
  • Supports MDI/MDI-X auto crossover
  • Provides broadcast storm protection
  • Embedded with a switch controller, supports auto-negotiation
  • Supports +10~30 VDC for power input
  • Provides surge protection 3,000 VDC for power line
  • Provides flexible mounting: DIN-rail, Wall, Stack

ADAM-6520L is a 5-port Industrial 10/100 Mbps Unmanaged Ethernet Switch, which substitutes ADAM-6510, which is being phased-out. With ADAM-6520L, users can upgrade their 10 Mbps hub to a 10/100 Mbps switch, for a small cost.

ADAM-6521

5-портовый промышленный Ethernet коммутатор с оптическим портом и скоростью передачи данных 10/100 Мбит/с
 
 
  • 1 многомодовый оптоволоконный порт 100 Мбит/с с разъемом ST и 4 порта Ethernet 10/100 Мбит/с с разъе
  • Дуплексный или полудуплексный режим передачи данных
  • Встроенный механизм размыкания Ethernet-колец
  • Поддержка авто-кроссовера MDI/MDI-X
  • Защита от лавины широковещательных пакетов
  • Диапазон входного напряжения +10 ~ 30 В пост. тока
  • Защита от перенапряжения 3,000 В пост. тока на линии подачи питания
  • Легкость установки на DIN рельс или в панель или ярусно
  • Диапазон рабочих температур -10 ~ 65° C

ADAM-6521 – это защищенный 5-портовый коммутатор Ethernet, который предназначен для развертывания сетей на промышленных предприятиях. С помощью него можно быстро и экономически эффективно расширять сетевую инфраструктуру. Он оснащен одним оптоволоконным портом и 4 медными портами с разъемами RJ-45. Используя оптоволоконные линии связи, можно избежать наведения помех на сигнал и передавать данные на расстояния до 2 км. ADAM-6521 предназначен для надежной и стабильной работы в промышленных условиях, поскольку он особенно подходит для применения на заводах по производству полупроводников, в складских помещениях и для обслуживания сборочных конвейеров.

ADAM-6521S

Industrial Switch with 4 10/100 Mbps Ethernet Port & 1 Single-mode Fiber Port
 
 
  • Provides 4 x 10/100 Mbps Ethernet ports with RJ-45 connector
  • Provides 1 x 100 Mbps multi/single-mode fiber port with SC connector
  • Supports full/half duplex flow control
  • Supports MDI/MDI-X auto crossover
  • Provides broadcast storm protection
  • Embedded with a switch controller, supports auto-negotiation
  • Embedded with the memory buffer, supports store-and-forward transmission
  • Support +10 ~ 30 VDC voltage
  • Provides surge protection 3000 VDC for power line
  • Provides flexible mountings: DIN-rail, panel, piggyback
  • Supports operating temperature: -10 ~ 65°C

ADAM-652S1 is an industrial-grade Ethernet switch and single-mode fiber converter. It is designed to help extend an Ethernet network up to 15 km through areas with electrical noise interference. ADAM-6521 has one fiber optic and four RJ-45 ports. With single-mode fiber transmission, you can prevent noise interference and achieve transmission distances up to 15 km. Thus, ADAM-6521S is especially suitable for industrial environments with long-distance Ethernet networking needs, e.g. warehouses, transportation, environmental monitoring, and many more.

ADAM-6521/ST

Промышленный Ethernet коммутатор с 4 портами 10/100Base-T и 1 многомодовым оптическим портом 10/100Base-FX с разъемом ST
 
 
  • 4 порта Ethernet 10/100 Мбит/с с разъемами RJ-45
  • 1 многомодовый оптоволоконный порт с разъемом ST
  • Дуплексный или полудуплексный режим передачи данных
  • Востренный механизм размыкания Ethernet-колец
  • Поддержка авто-кроссовера MDI/MDI-X
  • Защита от лавины широковещательных пакетов
  • Диапазон входного напряжения +10 ~ 30 В пост тока
  • Защита от перенапряжения 3,000 В пост тока на линии подачи питания
  • Защита портов Ethernet от электростатических разрядов 4,000 В пост тока
  • Легкость установки на DIN рельс или в панель или ярусно

Промышленный Ethernet коммутатор с 4 портами 10/100Base-T и 1 многомодовым оптическим портом 10/100Base-FX с разъемом ST

ADAM-6541

Ethernet to Multi-mode SC Type Fiber Optic Converter
 
 
  • Provides 1 x 10/100 Mbps Ethernet port with RJ45 connector
  • Provides 1 x 100 Mbps Multi-mode fiber optic port
  • Supports full/half duplex flow control and internal jumper for setting
  • Supports store and forward transmission
  • Supports auto-negotiation
  • Supports MDI/MDI-X auto crossover
  • Provides surge protection (EFT) 3,000 VDC for power line
  • Provides 4,000 VDC Ethernet ESD protection
  • Supports +10 ~ 30 VDC power input
  • Provides flexible mounting : DIN-rail, Panel Mounting, Piggy-back
  • Supports operating temperature from 0 ~ 60°C

ADAM-6541 is designed to convert Ethernet networks to fiber networks. It does so by transparently converting Ethernet signals to optic signals. The advantages of fiber optics are wide bandwidth, EMI immunity and long-distance transmission capability. Therefore, ADAM-6541 is an ideal solution for “fiber to building” applications at central offices or local sites.
ADAM-6541 supports MDI/MDIX auto detection, so you don’t need to use crossover wires. It also includes a switch controller that can sense the transmission speed (10/100 Mbps) automatically.Both the Ethernet port and the fiber port have memory buffers that support store-and-forward mechanisms. This assures data can be transmitted properly.
ADAM-6541 is extremely compact and can be mounted in three different ways: DIN-rail, Wall and Stack. ADAM-6541 can work normally from 0 ~ 60°C and accepts a wide voltage range from 10 ~ 30 VDC. Besides, it also provides 3,000 VDC surge (EFT) protection against over-voltage, so it is suitable for harsh operating environments.

ADAM-6541/ST

Ethernet to Multi-mode ST Type Fiber Optic Converter
 
 
  • Provides 1 x 10/100 Mbps Ethernet port with RJ45 connector
  • Provides 1 x 100 Mbps Multi-mode fiber optic port
  • Supports full/half duplex flow control and internal jumper for setting
  • Supports store and forward transmission
  • Supports auto-negotiation
  • Supports MDI/MDI-X auto crossover
  • Provides surge protection (EFT) 3,000 VDC for power line
  • Provides 4,000 VDC Ethernet ESD protection
  • Supports +10 ~ 30 VDC power input
  • Provides flexible mounting : DIN-rail, Panel Mounting, Piggy-back
  • Supports operating temperature from 0 ~ 60°C

EKI-3525M

4-port 10/100Mbps + 1-port 100FX Multi-mode Unmanaged Industrial Ethernet Switch
 
 
  • Supports IEEE 802.3az, Energy Efficient Ethernet standard -Automatically powers down ports that have no link -Budgets power output for different Ethernet cable length
  • Support IEEE 802.1p QoS- VIP port setting -Ensures time sensitive data gets delivered efficiently, even during bursts of high data traffic. -Ensures video streaming through switch with high priority.
  • Supports redundant 12 ~ 48 VDC power input and P-Fail relay
  • In Loop detection
  • Provides 1 x 100 Mbps Multi/Single-mode SC type fiber optic port (EKI-3525M/S)
  • Provides broadcast storm protection
  • Provides flexible mounting: DIN-rail and flat wall mounting

The EKI-3525M/S are a new generation of products and have four 10/100 Mbps Ethernet ports, and one multi-mode or single-mode fiber-optic port. Using fiber-optics, you can prevent noise from interfering with your system and support high-speed (100 Mbps) and high-distance (up to 30 km) transmissions. A low power Ethernet design automatically adjusts power consumption by detecting the link status and cable length. Designed with one "VIP" port to get optimal bandwidth for media traffic through the VIP port users can experience better multimedia streaming performance through the prioritized bandwidth setting. The devices come with compact metal and plastic housing that is IP40 rated to protect against dusty industrial environments. The wide power input power (8.4 to 52.4 VDC) is dedicated to operating in areas of unstable power and rugged environments. It also provides an event alarm and in the event of a power failure and connection loop, the integrated LED will activate the alarm to notify administrators.

EKI-3525S

4-port 10/100Mbps + 1-port 100FX Singlemode Unmanaged Industrial Ethernet Switch
 
 
  • Supports IEEE 802.3az, Energy Efficient Ethernet standard -Automatically powers down ports that have no link -Budgets power output for different Ethernet cable length
  • Support IEEE 802.1p QoS- VIP port setting -Ensures time sensitive data gets delivered efficiently, even during bursts of high data traffic. -Ensures video streaming through switch with high priority.
  • Supports redundant 12 ~ 48 VDC power input and P-Fail relay
  • In Loop detection
  • Provides 1 x 100 Mbps Multi/Single-mode SC type fiber optic port (EKI-3525M/S)
  • Provides broadcast storm protection
  • Provides flexible mounting: DIN-rail and flat wall mounting
Яндекс.Метрика
ПОЗВОНИТЕ МНЕ
+
Жду звонка!