Advantech's Ethernet I/O Modules, ADAM-6000 series, accomplishes this integration easily through the latest internet technology, so that it can remotely monitor the device status more flexibly. ADAM-6000 modules are empowered by Peer-to-Peer (P2P) and Graphic Condition Logic (GCL), and can perform as standalone products for measurement, control and automation wiith Advantech's P2P and GCL technology. With the easy-to-use and intuitive graphic utility, system configurations can be done in an extremely short time. ADAM-6000 series models include Analog Input/Output Modules and Digital Input/Output Modules.
ADAM-6015
7-ch Isolated RTD Input Modbus TCP Module
- I/O Type: 7 RTD
- 10/100Based-T Ethernet
- Supports multi-channel/multi-range
- Pt 100/1000, Ni, Balco 500
- Wiring burn-out detect function
The ADAM-6015 7-channel RTD input module accepts a wide range of RTD sensor types, including Pt100, Pt1000, Ni50, Ni508, and Balco 500 series. Multi input ranges are allowed in one module, creating a cost-effective solution. Most important of all, the ADAM-6015 supports open wiring diagnostic function which warns operators when the sensor wire has been broken. It specifically aims at building and factory temperature monitoring applications.
ADAM-6017
8-ch Isolated Analog Input Modbus TCP Module with 2-ch DO
- 10/100 Mbps communication rate
- I/O type: 8 AI / 2 DO
- Input type: mV, V, mA
- Provide default/customized web page
- Provides math. Functions: Max., Min., Avg.
ADAM-6018
8-ch Isolated Thermocouple Input Modbus TCP Module with 8-ch DO
- I/O Type: 8 T/C & 8 DO
- 10/100Based-T Ethernet
- Supports multi-channel/multi-range
- Provides default/customized web page
- 2,500 VDC optical isolation
The ADAM-6018 8-channel thermocouple input module is the most prevailing temperature sensor in today’s industrial automation market. In addition to 8 T/C input channels, the ADAM-6018 is also equipped with 8 digital output channels such as auxiliary alarm outputs or pure outputs. Last but not least, the ADAM-6018 comes with an external DIN-rail terminal board for wiring between the ADAM-6018 module and the field sensor. This special wiring mechanism greatly enhances the accuracy and reliability for thermocouple measurement in environmental and facility monitoring applications.
ADAM-6022
Ethernet-based Dual-loop PID Controller
- 2 loop PID control algorithms built in one package
- 3 analog input/1 analog output/1 digital input/1digital alarm output for 1 PID loop
- Support multiple analog I/O ranges: 0 ~ 10 VDC, 0 ~ 20 mA and 4 ~ 20 mA
- Support heating/cooling (direct/reverse) action mode
- Support loop open/close (PID disable/enable) and analog output manual control modes
- Built-in watchdog timer
Advantech’s ADAM-6022 is an Ethernet-enabled dual-loop PID controller for general purposed PID control applications. A user-friendly utility software is included for users to set PID parameters (Pv, Mv, & Sv). Through the integrated web page, users can monitor and change the control set point through the Internet via web browser. The ADAM-6022 also supports MODBUS/TCP protocol. HMI software can easily access this module to monitor the I/O data and change the control parameters.
ADAM-6024
12-ch Isolated Universal Input/Output Modbus TCP Module
- 6 differential channels
- 16-bit effective resolution
- Isolation Voltage: 2,000 VDC
- Sampling Rate: 10 samples/sec.
The ADAM-6024 is a universal I/O module for various signal applications. There are 6AI / 2AO / 2DI / 2DO included on this module. This module has a universal analog signal type, which makes it an excellent cost-effective I/O solution.
ADAM-6050
18-канальный модуль цифрового ввода/вывода с гальванической изоляцией
- Встроенный web сервер, наличие стандартной web страницы для мониторинга,
- возможность создания специализированных web страниц заказчиком
- Поддержка цепей с сухим/смачиваемым контактом
- Скорость передачи данных 10/100 Мбит/с
- 12 каналов цифрового ввода и 6 цифрового вывода
ADAM-6050 - это многоканальный модуль ввода/вывода со встроенным интерфейсом 10/100Base-T для бесшовного подключения к Ethernet сетям. Он оснащен 12 каналами цифрового ввода и 6 каналами цифрового вывода, напряжение его изоляции составляет 2000 В пост. тока.
ADAM-6051
16-канальный модуль цифрового ввода/вывода с двумя счетчиками
- Встроенный web сервер, наличие стандартной web страницы для мониторинга,
- возможность создания специализированных web страниц заказчиком
- Скорость передачи данных 10/100 Мбит/с
- Счетчик с частотой 5 кГц
- 12 каналов цифрового ввода, 2 цифрового вывода и 2 счетчика
ADAM-6051 оснащен 12 каналами цифрового ввода, 2 каналами цифрового вывода и 2 счетчиками, напряжение его изоляцией 2000 В пост. тока. Это многофункциональный модуль имеет встроенный Ethernet интерфейс и web сервер.
ADAM-6052
16-канальный модуль цифрового ввода/вывода с мощными выходами
- 16 каналов
- 8 каналов цифрового ввода, 8 цифрового вывода
- Напряжение на каналах цифрового вывода: 35 В
- Оптическая изоляция 2000 В пост. тока
16-канальный модуль цифрового ввода/ вывода с мощными выходами
ADAM-6060
6-ch Digital Input and 6-ch Relay Modbus TCP Module
- 6-ch DI, 6-ch RL, Ethernet-based smart I/O
- Remote monitoring and control with mobile devices
- Group configuration capability for multiple module setup
- Flexible user-defined Modbus address
- Intelligent control ability by Peer-to-Peer and GCL function
- Active I/O message by data stream or event trigger function
- Multiple protocol support: Modbus TCP, TCP/IP, UDP, HTTP, DHCP
- Web language support: XML, HTML 5, Java Script
ADAM-6000 accomplishes the integration of automation and enterprise systems easily through internet technology, so that users can avoid changing the entire architecture of the control system and even remotely monitor the device status more flexibly. ADAM-6000 modules are empowered by peer-to-peer (P2P) and Graphic Condition Logic (GCL), and can perform as standalone products for measurement, control and automation. Instead of having additional controllers or programming, system configurations can be done in
an extremely short time with the easy-to-use and intuitive graphic utility.
an extremely short time with the easy-to-use and intuitive graphic utility.
ADAM-6066
6-ch Digital Input and 6-ch Power Relay Modbus TCP Module
- 6-ch DI, 6-ch RL, Ethernet-based smart I/O
- Remote monitoring and control with mobile devices
- Group configuration capability for multiple module setup
- Flexible user-defined Modbus address
- Intelligent control ability by Peer-to-Peer and GCL function
- Active I/O message by data stream or event trigger function
- Multiple protocol support: Modbus TCP, TCP/IP, UDP, HTTP, DHCP
- Web language support: XML, HTML 5, Java Script
ADAM-6000 accomplishes the integration of automation and enterprise systems easily through internet technology, so that users can avoid changing the entire architecture of the control system and even remotely monitor the device status more flexibly. ADAM-6000 modules are empowered by peer-to-peer (P2P) and Graphic Condition Logic (GCL), and can perform as standalone products for measurement, control and automation. Instead of having additional controllers or programming, system configurations can be done in
an extremely short time with the easy-to-use and intuitive graphic utility.