PC/104 I/O modules provide DIO and AD/DA converters and relay output modules in a PC/104 form factor. The series includes various PC/104 add-on peripheral modules that feature a compact form factor, low power consumption, ruggedized design, and PC/104, PCI-104, or PC/104-Plus extension module with extended temperature options. PC/104 products are ideal for limited-space installations and applications in harsh environments.
PCM-3117
PCI to ISA Bridge Module
- Compatible with PC/104-Plus
- PCI-104 PCI inteface to PC/104 ISA interface bridge
The PCM-3724 is a PC/104 standard DIO module which attaches to the piggyback connector on your CPU card or PC/104 CPU module. The PCM-3724's two intel 8255 PPI compatiable chips provide 48 bits of parallel digital input/out.
PCM-3724
48-ch Digital I/O PC/104 Module
- 48 TTL digital I/O lines
- Output status read-back
- Channels simulate 8255 PPI mode 0
- Interrupt triggering, rising/falling edge
The PCM-3724 is a PC/104 standard DIO module which attaches to the piggyback connector on your CPU card or PC/104 CPU module. The PCM-3724's two intel 8255 PPI compatiable chips provide 48 bits of parallel digital input/out.
PCM-3725
8-ch Relay and Isolated Digital Input PC/104 Module
- 8-ch relay actuators output
- Opto-isolated 8-ch digital input
- LED indicators to show activated relays
- Onboard relay driver circuits
- Onboard input signal conditioning circuits
The PCM-3725 is a 8-ch relay actuator and 8-ch isolated digital input module that attaches to the PC/104 connector on your CPU card or PC/104 module. It offer eight relay actuators and 8-bit isolated digital input channels.
PCM-3730I
32-ch Isolated Digital I/O PCI-104 Module
- Compact size with robust design
- High-voltage isolation on both input and output channels (2,500 VDC)
- High output driving capacity
- Interrupt handling capability
- Keep digital output values after system reset
With onboard 32-ch isolated digital I/O and support for high-voltage isolation (2,500 VDC) on each input/output channel, the PCM-3730I can resist noise interference and delivers reliable performance. Additionally 32-ch isolation ensures accurate input/output data values while also allowing the system to simultaneously access more data.
PCM-3835
IDE Flash Disk Module/CompactFlash Card
- IDE to CompactFlash Adaptor
- Three methods of power entry1. Standard 4-pin power input2. PC/104 connector3. 2.5" HDD power input
- Two methods of data input1. IDE 40-pin connector2. IDE 44-pin connector
The PCD-3835 is an IDE compatible Solid State Disk (SSD). The SSD uses a Flash memory chip to store data. You can read and write to the solid state disk just as you read and write to a hard disk drive. However, solid state disks are designed to be much more reliable in harsh industrial environments.
PCM-3810I
250 kS/s, 12-bit, 16-ch Multifunction PCI-104 Module
- 16-ch single-ended or 8-ch differential A/D input, switch selectable
- 12-bit A/D converter, up to 250 kHz sampling rate
- Programmable gain for each input channel
- Onboard ring buffer for analog input and output
PCM-3810I is Advantech’s first multifunction PCI-104 module and integrates digital I/O, analog I/O, and counter functions in one small module for various embedded system applications, eliminating costs and saving space. To meet demanding task requirements, PCM-3810I possesses the highest sampling rate among all of Advantech’s PC/104 modules and supports many advanced trigger modes, such as pre-trigger, post-trigger, delay-trigger, and about-trigger.