Промышленные преобразователи среды передачи для Ethernet

Промышленные преобразователи среды передачи для Ethernet от Advantech представляют собой компактные и надежные устройства, предназначенные для преобразования сигналов сетей Fast или Gigabit Ethernet в ВОЛС, преобразующие электрические сигналы Ethernet в оптические. Благодаря современной промышленной технологии, Advantech предлагает надежные медиаконвертеры Ethernet для любых решений Fast или Gigabit Ethernet.

• Provides 1 x 10/100 Mbps Ethernet port with RJ45 connector
• Provides 1 x 100 Mbps Multi-mode/Single-mode SC type fiber port
• Provides internal jumper for Link Fault Pass-through (LFP) setting
• Supports full/half duplex flow control
• Supports store and forward transmission
• Supports auto-negotiation
• Supports MDI/MDI-X auto crossover
• Supports redundant 12-48 VDC power input
• Provides flexible mounting: DIN-rail and Panel mount

• Provides 1 x 10/100 Mbps Ethernet port with RJ45 connector
• Provides 1 x 100 Mbps multi-mode/single-mode SC type fiber port
• Provides internal jumper for Link Fault Pass-through (LFP) setting
• Supports full/half duplex flow control
• Supports store and forward transmission
• Supports auto-negotiation
• Supports MDI/MDI-X auto crossover
• Supports redundant 12-48 VDC power input
• Provides flexible mounting: DIN-rail and Panel mount
• Supports wide operating temperatures from -40 to 75°C

• Provides 1 x 10/100 Mbps Ethernet port with RJ45 connector
• Provides 1 x 100 Mbps Multi-mode/Single-mode SC type fiber port
• Provides internal jumper for Link Fault Pass-through (LFP) setting
• Supports full/half duplex flow control
• Supports store and forward transmission
• Supports auto-negotiation
• Supports MDI/MDI-X auto crossover
• Supports redundant 12-48 VDC power input
• Provides flexible mounting: DIN-rail and Panel mount

EKI-2541M/2541S is designed to convert Ethernet networks to fiber networks by transparently converting Ethernet signals to optic signals. The advantages of fiber optics are wide bandwidth, EMI immunity and long-distance transmissions.Therefore, EKI-2541M/2541S is an ideal solution for “fiber to building” applications at central offices or local sites. EKI-2541M/2541S supports MDI/MDIX auto detection, so you don’t need to use crossover wires. Furthermore, the EKI-2541M/2541S can work normally from -10 to 60°C and accepts a wide voltage range from 12 ~ 48 VDC. Besides, it also provides 3,000 VDC surge (EFT) protection against over-voltage, so it is suitable for harsh operating environments.

Link Fault Pass-Through (LFP)
EKI-2541M/2541S is an enhanced Ethernet to fiber-optic converter. Aside from its standard features, the versatile EKI-2541M/2541S also has the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the internal jumper to enable the LFP function, then EKI-2541M/2541S will force the link to shut down as soon as noticed that the other link has failed, giving the application software a chance to react to the situation.

• Provides 1 x 10/100 Mbps Ethernet port with RJ45 connector
• Provides 1 x 100 Mbps Multi-mode/Single-mode SC type fiber port
• Provides internal jumper for Link Fault Pass-through (LFP) setting
• Supports full/half duplex flow control
• Supports store and forward transmission
• Supports auto-negotiation
• Supports MDI/MDI-X auto crossover
• Supports redundant 12-48 VDC power input
• Provides flexible mounting: DIN-rail and Panel mount
• Supports wide operating temperatures from -40 to 75°C

10/100T (X) to Multi-Mode SC Type Fiber Optic Industrial Media Converter with Wide Temp.
EKI-2541M/2541S is designed to convert Ethernet networks to fiber networks by transparently converting Ethernet signals to optic signals. The advantages of fiber optics are wide bandwidth, EMI immunity and long-distance transmissions.Therefore, EKI-2541M/2541S is an ideal solution for “fiber to building” applications at central offices or local sites. EKI-2541M/2541S supports MDI/MDIX auto detection, so you don’t need to use crossover wires. Furthermore, the EKI-2541M/2541S can work normally from -10 to 60°C and accepts a wide voltage range from 12 ~ 48 VDC. Besides, it also provides 3,000 VDC surge (EFT) protection against over-voltage, so it is suitable for harsh operating environments.
Link Fault Pass-Through (LFP)
EKI-2541M/2541S is an enhanced Ethernet to fiber-optic converter. Aside from its standard features, the versatile EKI-2541M/2541S also has the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the internal jumper to enable the LFP function, then EKI-2541M/2541S will force the link to shut down as soon as noticed that the other link has failed, giving the application software a chance to react to the situation.

• Provides 1 x 1000 Mbps Ethernet port with RJ45 connector
• Provides 1 x 1000 Mbps fiber port with SC or SFP (mini-GBIC) type connector for 1000Base-SX/LX device
• Provides DIP switch for full/half duplex setting
• Supports MDI/MDI-X auto crossover
• Supports Auto-Negotiation
• Supports redundant 12 ~ 48 VDC power input
• Provides flexible mounting: DIN-rail and Wall mount
• Provides Link Fault Pass-through (LFP)
• Jumbo Frame: 9K bytes

EKI-2741 is designed to convert Gigabit Ethernet networks to Gigabit fiber networks by transparently converting Ethernet signals to optic signals. Therefore, EKI-2741 is an ideal solution for “fiber to building” applications at central offices or local sites. EKI-2741 supports MDI/MDIX auto detection, so you don’t need to use crossover wires. Furthermore, the EKI-2741 accepts a wide voltage range from 12 ~ 48 VDC. Besides, it also provides 3,000 VDC surge (EFT) protection against over-voltage, so it is suitable for harsh operating environments.
EKI-2741 is an enhanced gigabit Ethernet to fiber optic converter. Aside from its standard features, the versatile EKI-2741 also has the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. EKI-2741 will force the link to shut down as soon as noticed that the other link has failed, giving the application software a chance to react to the situation.

• Provides 1 x 1000 Mbps Ethernet port with RJ45 connector
• Provides 1 x 1000 Mbps fiber port with SC or SFP (mini-GBIC) type connector for 1000Base-SX/LX device
• Provides DIP switch for full/half duplex setting
• Supports MDI/MDI-X auto crossover
• Supports Auto-Negotiation
• Supports redundant 12 ~ 48 VDC power input
• Provides flexible mounting: DIN-rail and Wall mount
• Provides Link Fault Pass-through (LFP)
• Jumbo Frame: 9K bytes

• Provides 1 x 1000 Mbps Ethernet port with RJ45 connector
• Provides 1 x 1000 Mbps fiber port with SC or SFP (mini-GBIC) type connector for 1000Base-SX/LX device
• Provides DIP switch for full/half duplex setting
• Supports MDI/MDI-X auto crossover
• Supports Auto-Negotiation
• Supports redundant 12 ~ 48 VDC power input
• Provides flexible mounting: DIN-rail and Wall mount
• Provides Link Fault Pass-through (LFP)
• Jumbo Frame: 9K bytes

EKI-2741 is designed to convert Gigabit Ethernet networks to Gigabit fiber networks by transparently converting Ethernet signals to optic signals. Therefore, EKI-2741 is an ideal solution for “fiber to building” applications at central offices or local sites. EKI-2741 supports MDI/MDIX auto detection, so you don’t need to use crossover wires. Furthermore, the EKI-2741 accepts a wide voltage range from 12 ~ 48 VDC. Besides, it also provides 3,000 VDC surge (EFT) protection against over-voltage, so it is suitable for harsh operating environments.
EKI-2741 is an enhanced gigabit Ethernet to fiber optic converter. Aside from its standard features, the versatile EKI-2741 also has the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. EKI-2741 will force the link to shut down as soon as noticed that the other link has failed, giving the application software a chance to react to the situation.

• Provides 1 x 10/100 Mbps Ethernet port with RJ45 connector
• Provides 1 x 100 Mbps Multi-mode/Single-mode SC type fiber port
• Supports Link Fault Pass-through (LFP) function
• Supports full/half duplex flow control
• Supports store and forward transmission
• Supports Auto-Negotiation
• Supports MDI/MDI-X auto crossover
• Supports redundant 12-48 VDC power input
• Provides flexible mounting: DIN-rail and Wall mount

• Provides 1 x 10/100 Mbps Ethernet port with RJ45 connector
• Provides 1 x 100 Mbps Multi-mode/Single-mode SC type fiber port
• Supports Link Fault Pass-through (LFP) function
• Supports full/half duplex flow control
• Supports store and forward transmission
• Supports Auto-Negotiation
• Supports MDI/MDI-X auto crossover
• Supports redundant 12-48 VDC power input
• Provides flexible mounting: DIN-rail and Wall mount

EKI-3541M/3541S is designed to convert Ethernet networks to fiber networks by transparently converting Ethernet signals to optic signals. The advantages of fiber optics are wide bandwidth, EMI immunity and long-distance transmissions.Therefore, EKI-3541M/3541S is an ideal solution for “fiber to building” applications at central offices or local sites. EKI-3541M/3541S supports MDI/MDIX auto detection, so you don’t need to use crossover wires. Furthermore, the EKI-3541M/3541S can work normally from -10 to 60°C and accepts a wide voltage range from 8.4 ~ 52.4 VDC. Besides, it also provides 4,000 VDC surge (EFT) protection against over-voltage, so it is suitable for harsh operating environments.
Link Fault Pass-Through (LFP)
EKI-3541M/3541S is an enhanced Ethernet to fiber-optic converter. Aside from its standard features, the versatile EKI-3541M/3541S also has the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the internal jumper to enable the LFP function, then EKI-3541M/3541S will force the link to shut down as soon as noticed that the other link has failed, giving the application software a chance to react to the situation.

• Provides 1 x 10/100 Mbps Ethernet port with RJ45 connector
• Provides 1 x 100 Mbps Multi-mode fiber optic port
• Supports full/half duplex flow control and internal jumper for setting
• Supports store and forward transmission
• Supports auto-negotiation
• Supports MDI/MDI-X auto crossover
• Provides surge protection (EFT) 3,000 VDC for power line
• Provides 4,000 VDC Ethernet ESD protection
• Supports +10 ~ 30 VDC power input
• Provides flexible mounting : DIN-rail, Panel Mounting, Piggy-back
• Supports operating temperature from 0 ~ 60°C

ADAM-6541 is designed to convert Ethernet networks to fiber networks. It does so by transparently converting Ethernet signals to optic signals. The advantages of fiber optics are wide bandwidth, EMI immunity and long-distance transmission capability. Therefore, ADAM-6541 is an ideal solution for “fiber to building” applications at central offices or local sites.
ADAM-6541 supports MDI/MDIX auto detection, so you don’t need to use crossover wires. It also includes a switch controller that can sense the transmission speed (10/100 Mbps) automatically.Both the Ethernet port and the fiber port have memory buffers that support store-and-forward mechanisms. This assures data can be transmitted properly.
ADAM-6541 is extremely compact and can be mounted in three different ways: DIN-rail, Wall and Stack. ADAM-6541 can work normally from 0 ~ 60°C and accepts a wide voltage range from 10 ~ 30 VDC. Besides, it also provides 3,000 VDC surge (EFT) protection against over-voltage, so it is suitable for harsh operating environments.

• Supports 1-port 100 Mbps single strand fi ber optics
• Supports 10 ~30 VDC power input
• Easily to mounted on a DIN-rail, panel or piggyback
• Provides 100Base-FX WDM single strand fi ber
• Supports MDI/MDIX auto crossover.
• Embedded with a switch controller, supports auto-negotiation.
• Embedded with the memory buffer, supports store and forward transmission.

The ADAM-6542 adopts WDM technology that increases the information carrying capacity of fiber via multiplex transmit and receive signals at different wavelengths on the single strand cable. The WDM technology is implemented in couples. One site is installed ADAM-6542/W15 which transmit channel is 1550nm and receive channel is 1310nm. The other site is installed ADAM6542/W13 which transmit channel is 1310nm and receive channel is 1550nm. Both transmit and receive channels of ADAM-6542/W15 and ADAM-6542/W13 are multiplexed to a single strand cable. You can save half cabling cost when you use ADAM-6542/W15 and ADAM-6542/W13 instead of your original dual fiber converter.