Digital I/O Modules

ADAM-5000 digital input/output modules offer versatile input and output type for customer integrate with our ADAM controller or remote module as equipment monitoring system or data collection device. ADAM-5053S and ADAM-5057S are our high density I/O module, each of them provide up to 32 channel input and output.

16-канальный универсальный модуль цифрового ввода/вывода

• Количество каналов: 16
• Режим работы устанавливается поразрядно с помощью DIP-переключателей
• Цифровой вход: поддержка сухого и смачиваемого контактов
• Цифровые выходы: открытый коллектор, напряжение до 30 В, максимальная нагрузка 450 мВт
• Потребляемая мощность: 0.35 Вт (стандартно), 1.2 Вт (максимально)

16-канальный модуль цифрового ввода

• Количество каналов: 16
• Напряжение входа: 30 В максимально
• Тип схемы: ток возбуждения - 0.5 мА
• Потребляемая мощность: 0,4 Вт (стандартно), 0,53 Вт (максимально)

16-канальный модуль цифрового ввода со светодиодной индикацией

• Количество каналов: 16
• Напряжение ввода: 30 В максимально
• Тип схемы: ток возбуждения - 0.5 мА
• Потребляемая мощность: 0,5 Вт (стандартно), 0,84 Вт (максимально)
• Светодиодные индикаторы

16-ch Digital Input Modules

• 16-channel
• 50 Vmax Input Voltage
• 2500 Vdc Optical Isolation
• 70 Vdc Over Voltage Protection

8-ch Isolated Digital Input Module

• Channels: 8
• Digital input level: Logic level 0: +1 V max.
• Isolation voltage: 5000 VRMS
• Power consumption: 0.27 W (max)

The ADAM-5052 provides eight fully independent isolated channels. All channel designed with 5000 VRMS isolation to prevent ground loop effects and the damage from power surges on the input lines.

32-ch Isolated Digital Input Module

• Digital Input Channels:32
• Digital Input Channel I/O Type:DI, 24VDC (Sink/Source)
• 2500VDC Isolation voltage protection
• Only for ADAM-5560 series

16-ch Isolated Digital I/O Module with LED

• 16-channel
• I/O Type: 8 DO & 8 DI
• Optical Isolation: 2500 Vdc
• Power Consumption: 0.68 W (Typical)

16-ch Digital Output Modules

• Channels: 16
• Operating voltage: 30 Vmax
• Digital output: Open collector to 30 V, 100 mA max. load
• Power consumption: 0.25 W (typical); 0.53 W (max.)
• Power dissipation: 300 mW for each channel

16-ch Digital Output Modules

• Channels: 16
• Operating voltage: 30 Vmax
• Digital output: Open collector to 30 V, 100 mA max. load
• Power consumption: 0.5 W (typical); 0.84 W (max.)
• LED indicator: On: Output logic level "1"
• Output status hold function
• Power dissipation:300 mW for each channel

The ADAM-5056D features sixteen digital output channels with LED indicators. The digital outputs are open-collector transistor switches that you can control from the ADAM-5000 main unit. You also can use the switches to control solid-state relays.

16-ch Digital Output Modules

• 16-channel
• Optical Isolation: 2500 Vdc
• Over Voltage Protection: 70 Vdc
• Power Consumption: 0.6 W (typical)
• Power Dissipation: 300 mW

16-ch Sink Type Isolated Digital Output w/ LED Module

16-ch Source-type Isolated Digital Output Module with LED

• 16-channel
• Optical Isolation: 2500 Vdc
• Over Voltage Protection: 70 Vdc
• Power Consumption: 0.6 W (max.)

32-ch Isolated Digital Output Module

• Digital Output Channels:32
• Digital Output is Connect with ADAM-3920R
• 10A 250VDC&10A 30VDC Contact Rating
• 2500VDC optical isolation
• Only for ADAM-5560 series

The ADAM-5060 relay output module is a low-cost alternative to SSR modules. It provides 6 relay channels, two of Form A and four of Form C.

6-ch Relay Output Module

• Contact rating: AC: 125 V @ 0.6 A; 250 V @ 0.3 A
• Breakdown voltage: 500 VAC (50/60 Hz)
• Relay on time (typical): 3 msec.
• Relay off time (typical): 1 msec.
• Total switching time: 10 msec.
• Insulation resistance: 1000 MW minimum at 500 VDC
• Channels:2 x form A , 4 x form C

The ADAM-5060 relay output module is a low-cost alternative to SSR modules. It provides 6 relay channels, two of Form A and four of Form C.

8-ch Power Relay Output Module with LED

• Supports Modbus/RTU protocol
• High Power Relay Output : 250Vac@5A, 30Vdc@5A
• 8-channel Relay Output
• 8 form A channels
• Jumper setting for output status when reset
• 8 LED indicators

ADAM-5069 is designed for on/off control in high-voltage applications. The major feature of ADAM-5069 is the power relay rating at 240 V AC and 5 A. This range can satisfy most requirements for driving externally controlled devices such as lights, fans, alarm systems, and various electronic devices in industrial automation, security, building and home automation applications. ADAM-5069 provides a jumper setting for output values. This jumper can be set to clear or keep output values when reset. To easily identify the module’s status, it has been designed with 8 LED indicators. It also provides eight form A channels, and when combined with selected controllers, it will provide the Modbus/RTU protocol for standard communication requirements.