ADAM-5000 communication modules, including the ADAM-5091 and ADAM-5095, are equipped with serial ports to enable easy expandability and bi-directional communications. The communication module, such as the ADAM-5091 and ADAM-5095, is designed to be integrated with the ADAM-4000 and ADAM-5000 series, and transmit data to each other through the serial ports.
ADAM-5090
4-port RS-232 Module
- Ports: 4 serial ports
- Provide 128 byte FIFO
- Comm. Speed up to 115.2 Kbps
- Data signals: T x D, R x D, RTS, CTS,DTR, DSR, DCD, RI, GND
- Connector: RJ-45
- LED display: TX, RX
- For ADAM-5510, ADAM-5511 only
The ADAM-5090 is equipped with four RS-232 ports, which makes it especially suitable for bi-direction communication. It can simultaneously read data from other third-party devices such as modem, Bar Code reader, and PLCs as long as these devices are equipped with a RS-232 interface. Furthermore, the ADAM-5090 is fully integrated with the ADAM-4000/5000 series, and transmits data to each other through the RS-232 port.
ADAM-5091
4-port RS-232 Modules
- Ports: 4 serial ports
- Provide 128 byte FIFO
- Comm. Speed up to 115.2 Kbps
- Data signals: T x D, R x D, RTS, CTS,DTR, DSR, DCD, RI, GND
- Connector: RJ-45
- LED display: TX, RX
- For ADAM-5510, ADAM-5511 only
The ADAM-5091 is equipped with four RS-232 ports, which makes it especially suitable for bi-direction communication. It can simultaneously read data from other third-party devices such as modem, Bar Code reader, and PLCs as long as these devices are equipped with a RS-232 interface. Furthermore, the ADAM-5091 is fully integrated with the ADAM-4000/5000 series, and transmits data to each other through the RS-232 port.
ADAM-5095
2-port CAN Module with Isolation Protection
- 2 x CAN ports
- 2 x DB-9 male connectors
- With Tx, Rx LED indicators for each port
- High speed transmission up to 1 Mbps
- Optical isolation protection of 1000 VDC ensures system reliability
ADAM-5095 is a special purpose communication module that offers the connectivity of the Controller Area Network (CAN). With its built-in CAN controllers, the ADAM-5095 provides bus arbitration and error detection with an automatic transmission repeat function. This drastically reduces the chance of data loss and ensures system reliability. The on-board CAN controllers are located at different positions in the memory, and you can run both CAN controllers independently at the same time. With high-compatibility, the ADAM-5095 can be used in diverse systems.